Care And Cleaning; What To Do If - Electrolux EHD60150P User Manual

10 electrolux
Heat
set-
ting
3-4 Steam vegetables, fish, meat
4-5 Steam potatoes
4-5 Cook larger quantities of food, stews
and soups
6-7 Gentle fry: escalope, veal cordon bleu,
cutlets, rissoles, sausages, liver, roux,
eggs, pancakes, doughnuts
7-8 Heavy fry, hash browns, loin steaks,
steaks
9 Boil large quantities of water, cook pasta, sear meat (goulash, pot roast), deep-fry chips
The Power function is best to heat up large
quantities of water.
Information on acrylamides
Important! According to the newest
scientific knowledge, if you brown food

CARE AND CLEANING

Clean the appliance after each use.
Always use cookware with clean bottom.
Warning! The sharp objects and
abrasive cleaning agents can cause
damage to the appliance.
For your safety, do not clean the appli-
ance with steam cleaners or high-pres-
sure cleaners.
Scratches or dark stains on the glass-
ceramic cause no effect on how the
appliance operates.

WHAT TO DO IF...

Problem
You cannot activate the appli-
ance or operate it.
Use to:
• Activate the appliance again and set the heat setting in 10 sec-
onds.
• You touched 2 or more sensor fields at the same time. Only
touch one sensor field.
• The Child Safety Device or the Lock or Stop+Go operates. See
the chapter Operating instructions.
• There is water or fat stains on the control panel. Clean the con-
trol panel.
Time
20-45 Add some tablespoons of liquid
min
20-60 Use max. ¼ l water for 750 g of po-
min tatoes
60-150 Up to 3 l liquid plus ingredients
min
as nec- Turn halfway through
essary
5-15 Turn halfway through
min
(specially the one which contains starch),
acrylamides can pose a health risk. Thus,
we recommend that you cook at the lowest
temperatures and do not brown food too
much.
To remove the dirt:
1. – Remove immediately:melted plas-
tic, plastic foil, and food with sugar. If
not, the dirt can cause damage to the
appliance. Use a special scraper for
the glass . Put the scraper on the
glass surface at an acute angle and
move the blade on the surface .
– Remove after the appliance is suf-
ficiently cool:limescale rings , water
rings, fat stains, shiny metallic discol-
orations. Use a special cleaning agent
for glass ceramic or stainless steel.
2. Clean the appliance with a moist cloth
and some detergent.
3. At the end rub the appliance dry with
a clean cloth.
Possible cause and remedy
Hints