Operating The Appliance - Electrolux EHD80170P User Manual

6 electrolux
10
/
11
12
+number in the timer display shows
that there is a malfunction.
Residual heat indicator
Warning! Risk of burns from residual
heat!

Operating the appliance

On and Off
Touch for 1 second to start or stop the
appliance.
Automatic Switch Off
The function stops the hob automatically if:
• all cooking zones are off.
• you do not set the heat setting after you
start the hob.
• you cover a sensor field with an object (a
pan, a cloth, etc.) for longer than 10 sec-
Automatic Switch Off times
Heat setting
Stops after
The heat setting
Touch the control bar at the necessary heat
setting. The heat setting indicators come on.
The automatic heat up
The Automatic heat up function sets the
highest heat setting for some time, and then
decreases to the necessary level.
Touch . The indicator flashes. Set the heat
setting (1-8). The indicator of the heat setting
sensor field
1-2
6 hours
increases or decreases the time
selects the cooking zone
starts and stops STOP+GO
The induction cooking zones make the heat
necessary for cooking directly in the bottom
of the cookware. The glass ceramic is slightly
heated by the residual heat of the cookware.
onds. The sound operates until you re-
move the object.
• the hob gets too hot (e.g. when a sauce-
pan boils dry). Before you use the hob
again, the cooking zone must be cool.
• you use incorrect cookware.
and after 2 minutes the cooking zone
stops automatically.
• you do not stop a cooking zone or change
the heat setting. After some time
on and the hob stops. See the table.
3-4
5 hours 4 hours
comes on. The indicator above
and after some time goes out.
The time of the automatic heat up changes
for different heat settings.
11
10
9
8
7
6
5
4
3
2
1
0
1 2
function
comes on
5 6-9
1.5 hours
comes on
3 4 5 6 7
comes
8 9