Memory Check; Last3 Tests Average; Memory Deletion; Low Battery Indicator - JOYTECH DBP-1359b Owner's Manual

Unit Operation

Memory Check

With power off, you may check past test results by using the " M " button. The most
recent test result and oldest test result in memory can be viewed by pressing and holding
the " M " button upon activating test results you can press the " M "button to scroll
through all test results stored in memory.
/
No
Note: Previous test results will only be displayed from the most recently used memory
group. To check previous test results in other memory groups, you must first select
the desired group and then turn monitor off.
(See "Select Memory Group" on Page 10.)
Unit Operation

Memory Deletion

Memory for a selected group may be deleted while in Memory Check mode. Press and hold
the " SET " button for approximately 3 seconds to delete all memory records from the
selected groupwith voice broadcast "Memory Clear" and then transfer into
testing mode. Press the " " button to turn the unit off.
Note: Memory cannot be recovered once it has been deleted.

Low Battery Indicator

The unit will broadcast "Low Battery" when battery life is depleting and unable to inflate cuff for
testing. The " " appears simultaneously for approximately 5 seconds prior to shutting
off. Replace batteries at this time. No memory loss will occur throughout this process.
19
Unit Operation
Last 3 Tests Average
With power off, press the " M " button to activate screen display. After the unit
performs a self diagnosis, the screen will display the average test results from the last 3
readings of the last group used with voice broadcast. The "
with the corresponding WHO Blood Pressure Indicator. The Memory Check mode can be
accessed by pressing the "M " buttons. To check the average results from other groups, select
the desired group first prior to activating the " M " button in the off position. (See "Select
Memory Group" on Page 11.)
mmHg
/
21 Unit Operation

Bluetooth requirements

The monitor requires a device with:
. Bluetooth 4.0 or later
. Android 5.0 or later
. IOS 9.0 or later
And works with:
. iphone , iPod, iPad
. Android Phones and Tablets
Wireless communication
Frequency range : 2.4 Ghz (2400-2483.5 MHz)
Modulation : GFSK
Antenna gain:0.5dBi
20
" symbol will appear along
22