PROPRIETARY NOTICE 'The RTS product information and desisn disclosed herein were 01-iginatcd hy and are the property of Telex Communications, Inc. Telcx reserves all patent, proprietary design, nianufacturin:, reproduction, use and sales rights thereto, and to any an~clc disclosed therein, except to the extent rights are expressly granted to others.
(such as Models PS8 or PS15) may be conveniently connected to the SAP612 to distribute power to the intercom stations. Or, the SAP612 may be used with a non-TW power source. Switchable 200-ohm line termina- tions are built into the SAP612 for proper line termination when using a non-TW power source.
1.1 or channel one assignment.) Since equipped with termination resistors, set the terniinalion switches on the rear panel of the SAP612 to the External position (switch out). 2.2.1.3 Using other Power Sources (Figure 2-1) systems require 18-35 volts DC (32 volts nominal).
Sleeve Common SECTION 3: OPERATION The front panel of the SAP612 contains 12 pairs of switches: one pair Tor each user station string. The user slation strings 1-12 are identified across the top of the front panel. Channels 1 and 2 for each string arc idcn- tifled along the bottom of the panel.