Appendix 1: Tightening torques
Connection
M10
Mounting bolts M8 (grommets for single operation)
Mounting bolts M8 (hard mounting parts for parallel
operation)
Crankcase heater
Digital coil screw
Terminal block screw
Ground screw
DISCLAIMER
1. The contents of this publication are presented for informational purposes only and are not to be
construed as warranties or guarantees, express or implied, regarding the products or services
described herein or their use or applicability.
2. Emerson Climate Technologies GmbH and/or its affiliates (collectively "Emerson"), as
applicable, reserve the right to modify the design or specifications of such products at any time
without notice.
3. Emerson does not assume responsibility for the selection, use or maintenance of any
Responsibility for proper selection, use and maintenance of any Emerson product remains solely
with the purchaser or end user.
4. Emerson does not assume responsibility for possible typographic errors contained in this
publication.
36
Torque (Nm)
45 - 55
13 ± 1
27 ± 1
2 - 3
2
2.8
2.3
AGL_Ref_DG_YBDK1E_EN_Rev04
product.