Craftsman 580.751651 Owner's Manual page 3

6.5 horsepower 2200psi 3gpm high pressure washer
Table of Contents

Advertisement

CONGRATULATIONS
on your purchase of a Sears Crafts-
man high pressure washer.
It has been designed, engi-
neered and manufactured
to give you the best possible
dependability and performance.
_hould you experience
any problem you cannot easily
=,medy, please contact your nearest Sears Service Cen-
t.r/Department or call the 1-800 number listed on the front
.)f this manual.
We have competent, well-trained techni-
cians and the proper tools to service or repair this unit,
Please read and retain this manual.
The instructions will
enable you to assemble and maintain your high pressure
washer properly. Always observe the "SAFETY RULES."
MODEL
NUMBER
580.751651
SERIAL
NUMBER
DATE OF
PURCHASE
THE MODEL
AND SERIAL
NUMBERS
WILL
BE
FOUND ON A DECAL ATTACHED TO THE PRES-
SURE WASHER.
YOU SHOULD
RECORD
BOTH SERIAL
NUMBER
AND DATE OF PURCHASE
AND KEEP iN A SAFE
PLACE FOR FUTURE REFERENCE.
MAINTENANCE
AGREEMENT
A Sears Maintenance Agreement is available on this prod-
uct. Contact your nearest Sears store for details.
CUSTOMER
RESPONSIBILITIES
Read and observe the safety rules.
FoIIow regular schedule in maintaining, caring for and
using your high pressure washer.
Fol}ow the instructions under "Customer Responsibili-
ties" and "Storage" sections of this Owner's Manual.
PRODUCT
SPECiFICATiONS
Pressure Washer Specifications
'#UMP"PRESSURE
FLOW RATE
DETERGENT
MIX
DETERGENT
RATIO
Adjustable to 2200 psi
3 9pm
Use undiluted dete_ent
Adjustable to 73:1
WATER SUPPLY
TEMPERATURE
Not to exceed 140°F
SUCTION
HEIGHT
3 FT, maximum
Engine Specifications
ENGINE MODEL
RATED HORSEPOWER
DISPLACEMENT
SPARK PLUG:
Type:
Set Gap To,
GASOLINE CAPACITY
OIL (20 oz. capacity)
SOLID STATE IGNITION
AIR GAP
GN-Series
6.5
190CC
Champion RC12YC
or equivalent
0.030 ineh,,,(o,_,Temm
)
1 U.S, gallon
SAE 30 weight
0.0125 inch
NOTE: The engine of the pressure washer is equipped with
a spark arrestor muffler, The spark arrestor must be main-
tained in effective working order by the owner/operator` .
In the State of California a spark arrestor is required by law
(Section 4442 of the California Public Resources Code).
Other states may have similar laws, Federal laws apply on
federal lands.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents