Table of Contents
Advertisement
A-2
GENERAL DESCRIPTION
The downdraft table is a workbench with an integrated
extraction fan and filtration system that is used for
welding, grinding and plasma cutting applications.
Depending on the specific application, the use of
certain accessories is required and/or recommended.
See Accessories section of this manual.
The downdraft table features a work grid, a three-
stage prefiltration system for optimum spark arresting
and two oval main filter cartridges. Both pre and main
filters have dust drawers underneath. The working
height of the downdraft table is adjustable.
INTENDED USE
The product has been designed as a workbench with
integrated extraction and filtration facility for welding
and grinding purposes, provided the appropriate
options have been installed (See Accessories
Section of this manual). Using the product for other
purposes is considered contrary to its intended use.
The manufacturer accepts no liability for any damage
or injury resulting from such use. The product has
been built in accordance with state-of-the-art
standards and recognized safety regulations. Only
use this product when in technically perfect condition
in accordance with its intended use and the
instructions explained in the user manual.
COMPONENTS
The downdraft table consists of the following main
components See Figures A.1 and A.2:
A. Backdraft kit
B. Side panels (left + right)
C. Work grid (two-piece)
D. Control panel
E. Left door (controls/fan)
F. Right door (filter compartment)
G. Compressed air tank (DownFlex 400-MS/A only)
H. Prefilters (1st stage; located under work grid)
I. Dust drawers (prefiltration)
J. Dust drawer (main filter cartridges)
INSTALLATION
A
B
C
D
E
K. Filter cleaning mechanism
(DownFlex 400-MS/A only)
L. Filter cartridges (2)
M. Prefilters (2nd stage)
N. Fan
O. Outlet grid
P. Electrics high voltage
Q. Electrics low voltage
H
Q
P O
DOWNFLEX 200/400
FIGURE A.1 – COMPONENTS
G
FIGURE A.2 – COMPONENTS
N
M L
K
J
A-2
F
I
Advertisement
Table of Contents
