Specifications - RTS ICP-2000 User Manual

Select the RS-485 COM port to be used from the
TM-2000/MTM-2000 to each intercom system.
The COM port can be changed by right clicking
anywhere along an intercom system's entry in the
table. A pop-up menu will display. Select the
correct COM port by moving the pointer to the
Select COM Port entry and clicking on the
desired COM port.
Send the changes to the TM-2000/MTM-2000
and save the file.
6. Click the bar labeled Trunk on the left side of the
screen and then click the Definitions icon. A table
displaying trunk definitions will be displayed. On
initial setup this table will be empty. Do the
following:
Right-click on a trunk entry under the Icom 1
column. Select Choose New Assignment from
the pop-up menu that appears. Select the
intercom system that is desired for this end of the
trunk line. Repeat the same for the Icom 2
column in the same line except choose an
intercom system different than that selected for
Icom 1. This defines which two intercom systems
(Icom 1 and Icom 2) will be trunked via this entry
in the table.
Right-click in either the Port or Alpha entry
associated with the Icom 1 entry you just made
and select the Choose New Assignment from
the pop-up menu that appears. Select the Port or
Alpha to be used for the audio trunk line from the
system named in the Icom 1 column. Do the
same for the Port or Alpha entry associated with
the Icom2 entry except select the Port or Alpha
from the Icom 2 system for the audio trunk line.
If this particular trunk line is to be cascadable (i.e.
usable to connect two other adjacent systems),
then be sure to set the Cascade flag. To set or
clear the Cascade flag, right-click on the Cas-
cade entry for the trunk line and select Set
Cascade Flag or Clear Cascade Flag from the
pop-up menu that appears.
Repeat this procedure for each intercom system
audio trunk line that will be needed. When
finished send the changes to the TM-2000/MTM-
2000 and save the file.
7. Run AZedit. Within each intercom system,
assign keypanel keys as required to communicate
with destinations in other intercom systems. This
is similar to assigning keys in the local intercom
system, except that you will have to select an
intercom system first when making assignments.
Click the KP button on the toolbar to access
keypanel setup. Then, select the intercom port
where you want to add a key assignment that will
communicate with a remote intercom system. If
you use the Key Assignment Select screen to
assign keys, proceed as for normal key assign-
ment, except that you should select an intercom
system before selecting a scroll list. Press the F1
key on the computer keyboard to get help on
keypanel setup.
Be sure to send your changes to the intercom
system and save the file before exiting AZedit.

Specifications

TM-2000
Height: ....................................... 5.25" (133.35mm)
Width: ........................................ 19.0" (483mm)
Depth: ........................................ 18.5" (470mm)
Weight: ...................................... 48.7lbs (22.1kg)
Power: ....................................... 115/230 VAC
MTM-2000
Height: ....................................... 3.50" (88.9mm)
Width: ........................................ 19.0" (483mm)
Depth: ........................................ 19.5" (495.3mm)
Weight: ...................................... 23.12 lbs (10.48kg)
Power: ....................................... 115/230 VAC
SWP-2000
Height: ....................................... 1.75" (44mm)
Width: ........................................ 19.0" (483mm)
Depth: ........................................ 5.3" (133mm)
Weight: ...................................... 5.2lbs (2.4kg)
Power: ....................................... 100-240 VAC, 47-63
ICP-2000
Height: ....................................... 1.75" (44mm)
Width: ........................................ 19.0"" (483mm)
Depth: ........................................ 1.0" (25.4mm)
Weight: ...................................... 5.2lbs (2.4 kg)
Environment
Operating Temperature .............. 0° C to 50° C (32° F
Storage Temperature ................. -20°C to 75°C (-4° F
Humidity .................................... 0 to 95% non-
Approvals
UL, FCC, CE
12
(switch selected),
50/60 Hz. 2.6A
(switch selected),
50/60 Hz. 2.6A
Hz, 0.4 A
to 122° F)
to 167° F)
condensing