Advertisement
AssEmblY iNsTrUcTiONs
Step 7: Insert bottom shelf (Part # 23) between the four legs,
flat side facing up towards the ceiling. Insert sixteen
stove bolts (Part #1a) and completely tighten.
1a
Step 8: mounting casters: Put the four casters in place. The
two locking casters (Part #12) should be on one side
of the cart, and the two non locking casters (Part #10)
should be on the other (Left or right side, NoT
front or back). Using the 16 bolts (Part #9), washers
and fasteners (located in separate caster bag), com-
pletely tighten the casters to the bottom tray using a
13mm socket and 14mm combination wrench for the
bolt head. (Note: bolt head and one washer should be
on the inside of the bottom shelf, nyloc nut and one
washer will be on the caster side.)
10
msc4r / msc4bk / msc4bl / msc4TI / msc4sVA / msc4sb
23
12
9
msc4r, -bk, -bl, -Ti, -sVA, -sb
Step 9: carefully turn cart onto its casters.
Step 10: Open top lid using the key provided.
TooLS NEEDED FoR ASSEMBLY:
• 2 - 14mm Combination Wrenches
• 13mm Socket or Universal Socket
• 4" Extension
• 1/4" Ratchet
• #2 Phillips Screwdriver
Step 11: mount push handle/bracket assembly (Parts #5 & 6)
to the same side of the cart as the locking casters,
using the four stove bolts (Part #1b) provided. Finger
tighten at this time.
Step 12: Insert the 4 stove bolts (Part #4) provided to the
opposite side of the cart. Note: This stove bolt is shorter
due to not having to pass through a handle or bumper.
(step 11)
5
1b
6
Step 13: Insert the remaining 8 stove bolts (Part #1a).
3
Deluxe service cart
(step 12)
4
rev. 10/17/14
Advertisement
