Download Print this page
Matco Tools MSC4CAMO19 User Manual
Matco Tools MSC4CAMO19 User Manual

Matco Tools MSC4CAMO19 User Manual

Full drawer service cart with power prep

Advertisement

Quick Links

It is the responsibility of the owner to make sure all personnel read this manual prior to using the device. It is also the responsibility of the
device owner to keep this manual intact and in a convenient location for all to see and read. If the manual or product labels are lost or not
legible, contact Matco Tools for replacements. If the operator is not fluent in English, the product and safety instructions shall be read and
discussed with the operator in the operator's native language by the purchaser/owner or his designee, making sure that the operator
comprehends its contents. PLEASE NOTE: Loading cart beyond rated capacity may cause structural damage to the cart as well as personal
and /or property damage. Please educate your customers to the dangers of overloading.
PLEASE NOTE: Loading cart beyond rated capacity may cause structural damage to the cart as well as personal and/or property damage.
Please educate your customers to the "dangers of overloading".
• Lock lid and drawers before moving. • Apply brake on locking casters anytime cart is in place. • Do not pull cart. Push from handle on
end to move. • Units can tip or fall causing damage or personal injury. • Cart is designed to roll easily on flat surfaces and should not be
used on uneven or inclined surfaces. • Do not open more than one loaded drawer at a time. • Do not stand on or step in drawers. • Keep
children away from unit. • Wear gloves when lifting edges. • Before connecting to a power supply, always check to make sure the power
supply corresponds to the voltage required on the product. • Fully insert plug to reduce the risk of electric shock. • Always unplug when not
in use. • Disconnect power before installing or servicing. • Do not try to plug in unit or product when hands are wet or damp, or if standing
on a wet or damp surface or in water. • Never attempt to pick up unit or plugged in product that should fall in standing water. • This unit
is not waterproof and is intended for general use indoors. • Do not use in potentially dangerous locations, such as flammable or explosive
atmospheres. • Keep cord away from heat, oil, sharp edges or moving parts. • Failure to heed these warnings may result in personal injury
and/or property damage.
WARNING: This product can expose you to chemicals including nickel, which is known to the State
of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
MSC4CAMO19
WARNING
• Read and follow all instructions in User's Manual.
• Do not load carts beyond rated capacity:
Overall Load Capacity ................................................. 600 LBS
Top Compartment ........................................................ 180 LBS
Drawers ................................................................ 70 LBS each
Full Drawer Service Cart With Power Prep
Copyright © Professional Tool Products, 2019
1
MSC4CAMO19
All rights reserved
032519

Advertisement

loading

Summary of Contents for Matco Tools MSC4CAMO19

  • Page 1 If the manual or product labels are lost or not legible, contact Matco Tools for replacements. If the operator is not fluent in English, the product and safety instructions shall be read and discussed with the operator in the operator's native language by the purchaser/owner or his designee, making sure that the operator comprehends its contents.
  • Page 2 MSC4CAMO19 Full Drawer Service Cart With Power Prep ASSEMBLY INSTRUCTIONS TOOLS NEEDED FOR ASSEMBLY: • 13mm Socket or wrench Mount push handle/brackets assembly (Part #12, 13) to the same side of the cart as the swivel locking casters using the four stove bolts, washers, and nuts provided.
  • Page 3 MSC4CAMO19 Full Drawer Service Cart With Power Prep HARDWARE SPECIFICATIONS 4 pcs. 4 pcs. 4 pcs. Handle Hardware 16 pcs 16 pcs 16 pcs Caster Hardware TROUBLESHOOTING Problem: Back Lock/Unlock Switch does not engage Problem: Drawers appear not to fit, do not slide in accurately the drawer.
  • Page 4 MSC4CAMO19 Full Drawer Service Cart With Power Prep No. Part No. Description No. Part No. Description RSLKB Lock with Keys RSMSC4HDL Push Handle RSMSC4FDBP Set of 4 Bumpers (Including #17, (16) fasteners) RSMSC4HB Handle Brackets/Pr. w/ hardware These bumpers are attached to the legs with fasteners and may not be...