Advertisement
Quick Links
It is the responsibility of the owner to make sure all personnel read this manual prior to using the device. It is also the responsi-
bility of the device owner to keep this manual intact and in a convenient location for all to see and read. If the manual or prod-
uct labels are lost or not legible, contact Matco Tools for replacements. If the operator is not fluent in English, the product and
safety instructions shall be read and discussed with the operator in the operator's native language by the purchaser/owner or
his designee, making sure that the operator comprehends its contents. PLEASE NOTE: Loading cart beyond rated capacity may
cause structural damage to the cart as well as personal and /or property damage. Please educate your customers to the dangers
of overloading.
•
Read and follow all instructions in User's Manual
•
Do not load carts beyond rated capacity.
•
Lock lid and drawers before moving.
•
Apply brake on locking casters anytime cart is in place.
•
Do not pull cart. Push from handle on end to move.
•
Units can tip or fall causing damage or personal injury.
•
Do not open more than one loaded drawer at a time.
•
Do not stand on or step in drawers.
•
Keep children away from unit.
•
Wear gloves when lifting edges.
•
Cart is designed to roll easily on flat surfaces and should not be used on
uneven or inclined surfaces.
•
This product may contain one or more chemicals known to the State of
California to cause cancer and birth defects or other reproductive harm.
Wash hands thoroughly after handling.
•
Failure to heed these warnings may result in personal injury
and/or property damage.
MSC4RFA17
SERVICE CART WEIGHT CAPACITY
Total Net Load. . . . . . . . . . . . . . . . . . . . . . . . . 500 LBS
Top and Bottom Shelf . . . . . . . . . . . . . . . .150 LBS each
Small Top Drawers . . . . . . . . . . . . . . . . . . . 30 LBS each
Center and Bottom Drawers . . . . . . . . . . . 70 LBS each
Copyright © Professional Tool Products, 2017
1
MSC4RFA17
Deluxe Service Cart
All rights reserved
Rev. 08/04/17
Advertisement
Related Manuals for Matco Tools MSC4RFA17
Summary of Contents for Matco Tools MSC4RFA17
- Page 1 If the manual or prod- uct labels are lost or not legible, contact Matco Tools for replacements. If the operator is not fluent in English, the product and safety instructions shall be read and discussed with the operator in the operator's native language by the purchaser/owner or his designee, making sure that the operator comprehends its contents.
- Page 2 MSC4RFA17 Deluxe Service Cart ASSEMBLY INSTRUCTIONS Due to the weight of this cart we recommend that Step 3: (Before assembling the legs, remove the cable tie holding the bumper in place.) Insert the front leg TWO PEOPLE work together on the assembly. This cart (Part #7), labeled FL or FR into top lip of the cart.
- Page 3 MSC4RFA17 Deluxe Service Cart ASSEMBLY INSTRUCTIONS Step 7: Insert bottom shelf (Part # 23) between the four legs, Step 9: Carefully turn cart onto its casters. flat side facing up towards the ceiling. Insert sixteen stove bolts (Part #1a) and completely tighten.
-
Page 4: Troubleshooting
Deluxe Service Cart ASSEMBLY INSTRUCTIONS TROUBLESHOOTING Troubleshooting points during MSC4RFA17 Series Assembly: Step 14: Using 13mm socket, completely tighten all fasteners!! Problem: Drawers appear not to fit, do not slide in accurately Step 15: Insert spray can divider (Part #19) into provided cut and bump the cart sides. -
Page 5: Part Drawings
MSC4RFA17 Deluxe Service Cart PART DRAWINGS Leg (4) Push Handle Push Handle Bracket Front & Back Bracket Non-Locking Locking Swivel Caster (2) Caster (2) Narrow Side Small Lip Bumper (4) 2 with logo, 2 without Drawer Prybar Holder Handle (6) - Page 6 MSC4RFA17 Deluxe Service Cart PART DRAWINGS MSC4RFA17 Rev. 08/04/17...
- Page 7 MSC4RFA17 Deluxe Service Cart Item Part Req’d Description M8x22 Bolt M8x28 Bolt M8 Washer M8 Locking Nut M8x22 Bolt RSMSC4HB Handle Brackets/Pair with Hardware RSMSC4HDL Handle RSMSC4LGSB (stealth black) Leg/each RSMSC4SRPSB (stealth black) Screwdriver/Prybar Holder/each M8x16 Bolt (for casters) RSSWCS 5"...