Download Print this page
Matco Tools MSC4RFFDP18 Assembly Instructions

Matco Tools MSC4RFFDP18 Assembly Instructions

Advertisement

Quick Links

It is the responsibility of the owner to make sure all personnel read this manual prior to using the device. It is also the responsibility of the
device owner to keep this manual intact and in a convenient location for all to see and read. If the manual or product labels are lost or not
legible, contact Matco Tools for replacements. If the operator is not fluent in English, the product and safety instructions shall be read and
discussed with the operator in the operator's native language by the purchaser/owner or his designee, making sure that the operator
comprehends its contents. PLEASE NOTE: Loading cart beyond rated capacity may cause structural damage to the cart as well as personal
and /or property damage. Please educate your customers to the dangers of overloading.
PLEASE NOTE: Loading cart beyond rated capacity may cause structural damage to the cart as well as personal and/or property damage.
Please educate your customers to the "dangers of overloading".
• Lock lid and drawers before moving. • Apply brake on locking casters anytime cart is in place. • Do not pull cart. Push from handle on
end to move. • Units can tip or fall causing damage or personal injury. • Cart is designed to roll easily on flat surfaces and should not be
used on uneven or inclined surfaces. • Do not open more than one loaded drawer at a time. • Do not stand on or step in drawers. • Keep
children away from unit. • Wear gloves when lifting edges. • Before connecting to a power supply, always check to make sure the power
supply corresponds to the voltage required on the product. • Fully insert plug to reduce the risk of electric shock. • Always unplug when not
in use. • Disconnect power before installing or servicing. • Do not try to plug in unit or product when hands are wet or damp, or if standing
on a wet or damp surface or in water. • Never attempt to pick up unit or plugged in product that should fall in standing water. • This unit
is not waterproof and is intended for general use indoors. • Do not use in potentially dangerous locations, such as flammable or explosive
atmospheres. • Keep cord away from heat, oil, sharp edges or moving parts. • Failure to heed these warnings may result in personal injury
and/or property damage.
MSC4RFFDP18
WARNING
• Read and follow all instructions in User's Manual.
• Do not load carts beyond rated capacity:
Overall Load Capacity ................................................. 600 LBS
Top Compartment ........................................................ 180 LBS
Drawers ................................................................ 70 LBS each
WARNING: This product can expose you to chemicals including
nickel which is known to the State of California to cause cancer
and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
ADVERTENCIA: Este producto le podrá exponer a ciertos
químicos, para incluir el níquel, conocidos en el Estado de
California por ocasionar cáncer y defectos congénitos u otros
daños a la reproducción. Para mayores informes, visite:
www.P65Warnings.ca.gov.
MISE EN GARDE: Ce produit peut vous exposer à des produits
chimiques y compris le nickel, reconnu par l'État de la Californie
comme causant le cancer et des anomalies congénitales ou
d'autres effets nuisibles sur la reproduction. Pour de plus amples
informations, aller à www.P65Warnings.ca.gov.
Full Drawer Service Cart With Power Prep
Copyright © Professional Tool Products, 2018
1
MSC4RFFDP18
Rat Fink 2018
All rights reserved
04/18/18

Advertisement

loading

Summary of Contents for Matco Tools MSC4RFFDP18

  • Page 1 If the manual or product labels are lost or not legible, contact Matco Tools for replacements. If the operator is not fluent in English, the product and safety instructions shall be read and discussed with the operator in the operator's native language by the purchaser/owner or his designee, making sure that the operator comprehends its contents.
  • Page 2 MSC4RFFDP18 Full Drawer Service Cart With Power Prep Rat Fink 2018 ASSEMBLY INSTRUCTIONS TOOLS NEEDED FOR ASSEMBLY: • 13mm Socket or wrench Mount push handle/brackets assembly (Part #12, 13) to the same side of the cart as the swivel locking casters using the four stove bolts, washers, and nuts provided.
  • Page 3 MSC4RFFDP18 Full Drawer Service Cart With Power Prep Rat Fink 2018 HARDWARE SPECIFICATIONS 4 pcs. 4 pcs. 4 pcs. Handle Hardware 16 pcs 16 pcs 16 pcs Caster Hardware TROUBLESHOOTING Problem: Back Lock/Unlock Switch does not engage Problem: Drawers appear not to fit, do not slide in accurately the drawer.
  • Page 4 MSC4RFFDP18 Full Drawer Service Cart With Power Prep Rat Fink 2018 No. Part No. Description RSLKB Lock with Keys RSMSC4FDBP Set of 4 Bumpers (Including #17, (16) fasteners) These bumpers are attached to the legs with fasteners and may not be used on carts which originally did not use these fasteners because the legs were not made to accommodate them.