Table of Contents
Advertisement
2
Checking the Fluid Levels
and Tire Pressure
No Parts Required
Procedure
1.
Check the engine-oil level before and after
you first start the engine; refer to
Engine-Oil Level (page
2.
Check the brake-fluid level before you first start
the engine; refer to
Level (page
51).
3.
Check the transaxle-fluid level before you
first start the engine; refer to
Transaxle-Fluid Level (page
4.
Check the air pressure in the tires; refer to
Checking the Tire Pressure (page
3
Burnishing the Brakes
No Parts Required
Procedure
To ensure optimum performance of the brake system,
burnish (break-in) the brakes before use.
1.
Bring the machine up to full speed, apply the
brakes to rapidly stop the machine without
locking up the tires.
2.
Repeat this procedure 10 times, waiting 1 minute
between stops, to avoid overheating the brakes.
Important:
This procedure is most effective
if the machine is loaded with 227 kg (500 lb).
All manuals and user guides at all-guides.com
Checking the
38).
Checking the Brake-Fluid
Checking the
48).
16).
4
Reading the Manual and
Viewing the Setup Material
Parts needed for this procedure:
1
Operator's Manual
1
Engine owner's manual
1
Registration card
1
Predelivery Inspection Form
1
Certificate of Quality
2
Key
Procedure
•
Read the Operator's Manual and the engine
owner's manual.
•
Fill out the registration card.
•
Complete the Predelivery Inspection Form.
•
Review the Certificate of Quality.
10
Advertisement
Table of Contents
