Starting And Warming Up A Cold Engine - Yamaha Venture XVZ13TFR 2002 Owner's Manual

Starting and warming up a
cold engine
In order for the ignition circuit cut-off
system to enable starting, one of the
following conditions must be met:
G
The transmission is in the neutral
position.
G
The transmission is in gear with
the clutch lever pulled and the
sidestand up.
WARNING
@
G
Before starting the
check the function of the igni-
tion circuit cut-off system ac-
cording to the
described on page 3-21.
G
Never ride with the sidestand
down.
@
OPERATION AND IMPORTANT RIDING POINTS
EAU01789*
1. Turn the fuel cock lever to "ON".
EW000054 2. Turn the key to "ON" and make
sure that the engine stop switch is
engine,
set to "
CAUTION:
@
procedure
If the fuel level warning light comes
on, check the fuel level, and, if nec-
essary, refuel as soon as possible.
@
3. Shift the transmission into the neu-
tral position.
".
EC000035
6-2
NOTE:
@
When the transmission is in the neutral
position, the neutral indicator light
should be on, otherwise have a
Yamaha dealer check the electrical cir-
cuit.
@
6