Yamaha Venture XVZ13TFR 2002 Owner's Manual page 64

1. CB radio indicator light
Selecting a CB channel
1. Make sure that the CB radio is
turned on and is selected. (See
pages 4-5 and 4-6.)
2. Repeatedly push either side of the
up/down switch for less than one
second until the desired CB chan-
nel ("Ch:01" through "Ch:40") is
displayed.
AUDIO SYSTEM AND CB RADIO
NOTE:
@
All channels, except channel 9, may be
used for communications between sta-
tions operating under different licens-
es. Channel 9 has been reserved by
the F.C.C. for emergency communica-
tions involving the immediate safety of
individuals or immediate protection of
property. Channel 9 may also be used
to render assistance to a motorist. This
is an F.C.C. rule and applies to all oper-
ators of CB radios.
@
4-20
Adjusting the squelch level
The squelch is a noise suppresser de-
signed to reduce or eliminate back-
ground noise in the absence of an
incoming signal. The squelch level can
be adjusted as follows.
1. Push the "CB" button once for less
than one second. The squelch lev-
el appears in the display (e.g.,
"SQ:10").
4