Speaker Connections - Toa MX-5348-AS 1 Instruction Manual

5.2. Speaker Connections

Using Terminal Output.
CAUTION !
Impedances indicate at the terminal represent the total impedance (load) of the speaker system.
- Total impedance in "4 Ω Line" must same or over than 4 Ω.
- Total impedance in "100 V Line" must same or over than 21 Ω.
Terminal 4 Ω and 100 V cannot be use together.
Using Zone Selector Terminal
100 V Line Speaker
Switch Remote ZONE 1 to activate the Speaker ZONE 1
Switch Remote ZONE 2 to activate the Speaker ZONE 2
Switch Remote ZONE 3 to activate the Speaker ZONE 3
Please put the terminal cover in place after installing the speaker cable. Due to the voltage
on the speaker terminal which may cause electric shock, you must not touch the terminal.
Speaker
Speaker ZONE 1
Speaker ZONE 2
Speaker ZONE 3
100 V Line Speaker
Using Remote CTRL IN Terminal
Speakers
Remote ZONE 1
Remote ZONE 2
Remote ZONE 3