Toa M-9000M2 Safety Instructions

9000M2 SERIES AMPLIFIER

1. IMPORTANT SAFETY INSTRUCTIONS

• Read these instructions.
• Keep these instructions.
• Heed all warnings.
•
Follow all instructions.
•
Do not use this apparatus near water.
• Clean only with dry cloth.
•
Do not block any ventilation openings. Install in
accordance with the manufacture's instructions.
• Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
•
Do not defeat the safety purpose of the polarized or
grounding-type plug.
A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are
provided for your safety.
If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
•
Only use attachments/accessories specified by the
manufacturer.
• Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus.
When a cart is used, use caution
when moving the cart/apparatus
combination to avoid injury from
tip-over.
• Unplug this apparatus during lightning storms or when
unused for long periods of time.
•
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.

SAFETY INSTRUCTIONS

M-9000M2
A-9060DHM2
A-9120DHM2

2. SAFETY PRECAUTIONS

• Before installation or use, be sure to carefully read all the
instructions in this section for correct and safe operation.
• Be sure to follow all the precautionary instructions in this
section, which contain important warnings and/or
cautions regarding safety.
• After reading, keep this manual handy for future
reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used
in this manual to prevent bodily injury and property damage
which could result from mishandling.
Before operating your product, read this manual first and
understand the safety symbols and messages so you are
thoroughly aware of the potential safety hazards.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operation and maintenance (servicing)
instruction in the literature accompanying the appliance.
WARNING
Indicates a potentially hazardous situation which,
if mishandled, could result in death or serious
personal injury.
When Installing the Unit
• Do not expose the unit to rain or an environment where it
may be splashed by water or other liquids, as doing so
may result in fire or electric shock.
• Use the unit only with the voltage specified on the unit.
Using a voltage higher than that which is specified may
result in fire or electric shock.
• Do not cut, kink, otherwise damage nor modify the power
supply cord. In addition, avoid using the power cord in
close proximity to heaters, and never place heavy objects
-- including the unit itself -- on the power cord, as doing
so may result in fire or electric shock.
• Avoid installing or mounting the unit in unstable locations,
such as on a rickety table or a slanted surface. Doing so
may result in the unit falling down and causing personal
injury and/or property damage.
• External wiring connected to the terminals marked with
requires installation by an instructed person.
• The apparatus shall be connected to a mains socket
outlet with a protective earthing connection.
A-9060SM2
A-9120SM2
A-9240SHM2