Lead free ss316 45 push button drinking bubbler tap (4 pages)
Summary of Contents for Galvin Specialised Ezy-Drink TD00C-LM
Page 1
Cam action Working Pressure Range (kPa) Working Temperature Range (°C) Nominal Flow Rate (LPM) Finish Chrome NOTE: Galvin Specialised continually strive to improve their products. Specifications may change without notice. TOOLS REQUIRED Power drill Spanner or adjustable crescent ...
Page 2
1/2" BSP INSTALLATION IMPORTANT: Galvin Specialised products must be installed in accordance with these installation instructions and in accordance with AS/NZS 3500, the PCA and your local regulatory requirements. Water and/or electrical supply conditions must also comply to the applicable national and/or state standards.
Page 3
Version 2, 16 August 2017, Page 3 of 4 3. Testing Once the drinking tap has been installed and tested for leaks, the water height must be adjusted to suit the available pressure. TROUBLESHOOTING PROBLEM CAUSE RECTIFICATION Inconsistent flow Blocked top assembly Remove top assembly and clean Water is not flowing from tap...
Page 4
Version 2, 16 August 2017, Page 4 of 4 WARRANTY The warranty set forth herein is given expressly and is the only warranty given by the Galvin Engineering Pty Ltd. With respect to the product, Galvin Engineering Pty Ltd makes no other warranties, express or implied. Galvin Engineering Pty.