Maytag W11117747A User Instructions page 9

Odors and smoke are normal when the oven is used the first few
times or when it is heavily soiled.
Control Display
The display will flash when powered up or after a power loss.
Press CANCEL to clear. When the oven is not in use, the time
of day is displayed.
Tones
Tones are audible signals, indicating the following:
One Tone
Valid keypad press
■
Oven is preheated (long tone).
■
Kitchen timer (long tone with reminder tone every minute)
■
Function has been entered.
■
Three Tones
Invalid keypad press
■
Four Tones
End of cycle (with reminder tone every 1 minute)
■
Use Settings to change the tone settings.
Settings
Many features of the oven control can be adjusted to meet your
personal needs. These changes are made using Settings.
Use the Settings keypad to scroll through the features that can be
changed. Each press of Settings will advance the display to the
next setting. After selecting the feature to be changed, the control
will prompt you for the required input. Details of all of the feature
changes are explained in the following sections.
Press CANCEL UPPER or CANCEL LOWER to exit Settings.
Fahrenheit and Celsius
The temperature is preset to Fahrenheit, but it can be changed
to Celsius.
1. Press SETTINGS until "TEMP UNIT" is displayed.
2. The current setting will be displayed.
+
3. Press the Time/Temp keypad to adjust the setting.
4. Press CANCEL UPPER or CANCEL LOWER to exit and
display the time of day.
Audible Tones Disable
Turns off all tones, including the end-of-cycle tone and keypress
tones.
1. Press SETTINGS until "SOUND" is displayed.
2. The current setting will be displayed.
+
3. Press the Time/Temp keypad to adjust the setting.
4. Press CANCEL UPPER or CANCEL LOWER to exit and
display the time of day.
OVEN USE
IMPORTANT: The health of some birds is extremely sensitive
to the fumes given off. Exposure to the fumes may result in
death to certain birds. Always move birds to another closed
and well-ventilated room.
Electronic Oven Controls
Sound Volume
Sets the pitch of the tone to either high or low.
1. Press SETTINGS until "SOUND VOLUME" is displayed.
2. The current setting will be displayed.
3. Press the Time/Temp
4. Press CANCEL UPPER or CANCEL LOWER to exit and
display the time of day.
End-of-Cycle Tone
Activates or turns off the tones that sound at the end of a cycle.
1. Press SETTINGS until "END TONE" is displayed.
2. The current setting will be displayed.
3. Press the Time/Temp
4. Press CANCEL UPPER or CANCEL LOWER to exit and
display the time of day.
Keypress Tones
Activates or turns off the tones when a keypad is pressed.
1. Press SETTINGS until "KEYPRESS TONE" is displayed.
2. The current setting will be displayed.
3. Press the Time/Temp
4. Press CANCEL UPPER or CANCEL LOWER to exit and
display the time of day.
Reminder Tones Disable
Turns off the short repeating tone that sounds every 1 minute
after the end-of-cycle tones.
1. Press SETTINGS until "REMINDER TONE" is displayed.
2. The current setting will be displayed.
3. Press the Time/Temp
4. Press CANCEL UPPER or CANCEL LOWER to exit and
display the time of day.
12/24 Hour Clock
1. Press SETTINGS until "12/24 HOUR" is displayed.
2. The current setting will be displayed.
3. Press the Time/Temp
4. Press CANCEL UPPER or CANCEL LOWER to exit and
display the time of day.
Demo Mode
IMPORTANT: This feature is intended for use on the sales floor
with 120 V power connection and permits the control features
to be demonstrated without the oven turning on. If this feature
is activated, the oven will not heat.
1. Press SETTINGS until "DEMO MODE" is displayed.
2. The current setting will be displayed.
3. Press the Time/Temp
4. Press CANCEL UPPER or CANCEL LOWER to exit and
display the time of day.
+
keypad to adjust the setting.
+
keypad to adjust the setting.
+
keypad to adjust the setting.
+
keypad to adjust the setting.
+
keypad to adjust the setting.
+
keypad to adjust the setting.
9