Features - Maple Systems IO-SHSC02 User Manual

1. High Speed Counter (HSC) module covers a wide range of high-speed pulses. (-2147483648—
2147483647) The counted value is stored in the buffer memory as a signed 32-bit binary value.
2. Different types of operation mode are provided.
- 1 Phase input 1 Multiplication (Increasing/decreasing count operated by software setting),
- 1 Phase input 2 Multiplication (Increasing/decreasing count operated by software setting),
- CW/CCW
: 2 Phase input 1 Multiplication
: 2 Phase input 2 Multiplication
: 2 Phase input 4 Multiplication
3. 2 counter modes are selectable.
- Linear counter
Counts within the range of -2147483648—2147483647. If the count exceeds the range, it
overflows.
- Ring counter
Counts repeatedly between maximum and minimum value.
4. Output Compare (2 outputs per channel)
This functionality is used to compare present count value with compared value and turn the
Output Compare ON or OFF.
5. 4 types of count functionalities are provided.
- Latch counter
- Sampling counter
- Periodic pulse counter
- Disable count
6. Preset and enable count operation can be run by an external signal.
Input voltage to PRE and FUNC terminal to run preset and enable count operation.

Features

- 9 -