Table of Contents
Advertisement
Product Information
3. Specify each setting on the editing screen, and then select OK.
Items
Media Setting Name
Media Type
Platen Gap
Drying Time per Pass
Paper Thickness
Paper Size Check
Paper Feed Offset
Paper Feed Offset(Bottom)
ICC Profile
4. Select the edited paper from paper type in Epson Print Layout or the printer driver, and then print.
>
>
Paper Information
Printing to Paper Types Other than Genuine Paper
Setting Explanation
Specify a name for the media settings.
Set the category name for the paper. This is displayed to the paper type display in
the printer driver or on the printer's control panel.
Specify the interval (platen gap) of the print head and the paper. If the paper is
smeared, increase the value. If running Print Head Alignment on the printer does
not improve graininess or blurring in the print outs, decrease the value.
Specify the length of time to stop the print head after each pass to help the ink dry.
Depending on the paper, the ink may not dry easily. Specify a longer drying time
when ink dripping or bleeding occurs in the print outs. Note that setting a longer
drying time will increase the overall print time.
Specify the paper thickness.
We recommend selecting this setting. Clear this checkbox if a paper error is
displayed even if you have loaded the paper correctly. Note that if you clear this
checkbox, printing may be performed beyond the edges of the paper and the
inside of the printer may be stained with ink.
Specify this setting when banding (horizontal band-like patterns or uneven colors)
cannot be resolved even after checking and cleaning the print head or performing
Print Head Alignment on the printer. If the speed of the paper feed is too slow,
dark banding will occur. In this situation, adjust the paper feed in the positive (+)
direction. If the paper feed is too fast, white banding will occur. In this situation,
adjust the paper feed in the negative (-) direction.
Specify the value for paper feed offset for the printing area up to approximately 39
mm from the end of cut paper.
Allows you to specify the ICC profile for other paper types.
195
Advertisement
Table of Contents
