Connection - Teac GF-650 Owner's Manual

CAUTION
< Switch off the power to all equipment before making connections.
< Read the instructions of each component you intend to use with this unit.
< Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the
signal interconnection cables together with the AC power cord.
A
FM antenna
While in FM mode, tune in an FM station and extend the lead to find the best position
for the reception. This antenna may need to be repositioned if you move your unit to a
new location.
B
AUX IN/OUT jacks
Analog 2-channel audio signal is input or output from these jacks. Connect these jacks
to a CD player, cassette tape deck, etc. using commercially avaialble RCA cables.
Make sure to connect:
C
AC Power Cord
After all other connections have been completed, connect the plug to the AC wall
socket.
Be sure to connect the power cord to an AC outlet which supplies the correct voltage.
Hold the power plug when plugging or unplugging the power cord.
10

Connection

A
L R R L
AUDIO AUDIO
C
OUT IN
CD player, cassette tape deck, etc.
white plug q white jack (L: left channel)
red plug q red jack (R: right channel)
B