Victron energy VM-3P75CT Manual page 10

Victron VM-3P75CT Energy Meter Manual
4 5 6 7 8
Once the Role has been properly set, the configuration is done.
GX device monitoring
After the VM-3P75CT has established a connection to the GX device in the local network, the device must be activated in the
Modbus TCP/UDP menu so that it appears in the Device List.
Go to Settings → Modbus TCP/UDP devices → Discovered devices and enable the discovered energy meter; it's disabled by
default when first installed and turned on.
After activation, the energy meter will be displayed in the Device List.
Right-click on the device will take you to the device overview page on which the current data of the individual phases, the AC
totals and the total energy per phase can be read out.
An overview of the connection and hardware-specific data can be found on the Device page. There, you can also assign a
custom name for the meter.
Page 8 Configuration & Monitoring