Mooka GL-FS32 - Air Purifier Manual

Also See for GL-FS32:

User manual (20 pages)

Table of Contents

Contents

1 AIR PURIFIER FUNCTIONS
2 CONTROL PANEL
3 SPECIFICATIONS
- 3.1 CONTAMINANTS THAT CAN BE REMOVED
4 GENERAL CONTROL
5 SWITCHING BETWEEN MODES
6 MORE INFORMATION
7 PART/BUTTON
8 TROUBLESHOOTING
9 MAINTENANCE
- 9.1 INTERNAL COMPONENTS
10 SAFETY AND NOTIFICATIONS
11 BEFORE YOU GET STARTED
12 WARRANTY
13 Documents / Resources
- 13.1 References
- 13.2 Download manual

Mooka GL-FS32 - Air Purifier Manual

AIR PURIFIER FUNCTIONS

Completely purify the air in your home, for a comfortable living environment.

DUST, ALLERGENS & POLLUTANTS

With its powerful HEPA filter, this air purifier can eliminate more than 99.97% of airborne particles passing through it that are larger than 0.3 microns in diameter, including dust, pet dander, fire pollutants, tobacco residue, and allergens such as pollen, mold spores and dust mites.

SMOKE & ODORS

Cooking, smoking, pet odors, trash can smells... We are surrounded by bad smells and odors in our everyday life. The Mooka air purifier can eliminate these for you.

UV STERILIZER

Microorganisms such as bacteria and viruses in the air can be a major health risk factor. This air purifier is equipped with a UV Sterilizer to neutralize these microorganisms and protect the health of your family.

HIGH CONCENTRATION OF NEGATIVE-IONS

Negative ions can quickly absorb and neutralize harmful substances, improving the body's immunity. Negative ions are known to have virus-killing properties. The quantity of negative ions is also one of the most important standards by which air quality is measured.

FILTER REPLACEMENT REMINDER

After about 2,000 hours of operation, the four segments of the filter replacement indicator light up to remind you to replace the used filter.

HIGHLY EFFICIENT COMPOSITE FILTER

Preliminary Filter: Effectively filters out big particles and hair
HEPA filter: H12 class filter can effectively remove tiny dust and smoke particles.
Activated carbon filter: Effectively adsorbs bad smells and harmful gases.
Formaldehyde adsorption particles: For the adsorption and decomposition of formaldehyde.

CONTROL PANEL

Control Panel Overview

SPECIFICATIONS

Voltage/Frequency	AC100V~120V/60Hz
Ion output	2×107pcs/cm3
Fan speed	High	Med	Low	Sleep	Standby
Power consumption	75W	41W	36W	19W	<1W
Product net weight	12.3 lbs
Power cord length	5.9 feet
Dimensions	L350×W180×H466mm

* For safety reasons and for saving power, please disconnect the appliance from mains power when not using. Machine standby power consumption: less than 2W.

CONTAMINANTS THAT CAN BE REMOVED

* When operating the appliance buttons, the buzzer emits a "di" sound.

GENERAL CONTROL

When connecting the appliance to power, you will hear a "beep" sound and all the indicators on the control panel will light up for 3 seconds and the appliance will go into standby mode. Use the ON/OFF button on the control panel or the remote control to turn on the appliance.
After turning on the appliance, the ionizer will start to work, and the appliance will operate in "Auto Mode".
In "Auto Mode", all four quadrants of fan speed indicator will light up, and the appliance will measure air quality and display 1 of 3 colors: blue (good air quality); green (moderate air quality); red (poor air quality). The appliance will automatically adjust the fan speed according to the air quality. When in "Manual Mode", the LED will also change color according to the air quality, but the fan speed will remain what you set it at.
Use the "Timer" button on the control panel or remote control to choose the timer program -Off/1/2/4/8 hours - (repeat).
The ionizer can be turned on/off via the "Ionizer" button on the control panel or remote control. When the negative ion function is working, the ion symbol on the control panel will light up.
The UV light will start to work after the appliance is turned on. After every 4 hours, the UV light will turn itself off. The UV function can only be turned on/off via the remote control.

SWITCHING BETWEEN MODES

In Auto Mode: Use the 'fan' button on remote or 'fan speed' on the control panel to enter 'Manual Mode', where fan speed will remain what you set it at. Press 'mode' (remote) once or 'fan speed'(control panel) four times to enter Sleep Mode.
In Sleep Mode: All lights except for the sleep mode indicator will be turned off. You can press any key once to activate the light. If no other key is pressed in 2 minutes, it will go back to Sleep Mode. When light is activated, press 'mode' or 'fan' (remote) or 'fan speed'(control panel) to exit Sleep Mode.
In Manual Mode, press 'mode' (remote) to enter Auto Mode, then Sleep Mode. You can also use the 'fan speed'(control panel) to enter Sleep Mode, then Auto Mode.

MORE INFORMATION

Real-time monitoring of air quality
This air purifier can defect air quality and automatically adjust the air flow. The color of the LED will show the air quality:
Blue LED: Air is clean, no pollutants, air quality is good.
Green LED: Some air pollutants, air quality is average.
Red LED: High amount of pollutants, air quality is bad.

Multiple levels of air purification
This air purifier adopts the most advanced negative ion technology. With a HEPA filter, activated carbon filter, special formaldehyde adsorption particles and UV sterilizer, it effectively filters the air, eliminating peculiar smells and decomposing harmful gases.

Sensor	Can sense	Can sometimes sense	Can't sense
Air sensor	Smoke, incense, cooking and pet odors Cosmetics, alcohol Sprays	Water vapour Oil smoke Temperature changes when opening/ closing the door	Dust, ticks, feces, mildew reproductive cells and pollen Bacteria, viruses
Benefit of negative ions	Negatively charged ions may help people feel more at ease and promote good health, which explains the popularity of things such as negative ion generators and other gadgets. Likewise, the sense of well-being many people feel after a rainstorm is believed by some to be caused by the high concentration of negatively charged ions in the air as the water beings to evaporate. Additionally, a negatively charged ion inhaled with other oxygen molecules may help oxygen to be more easily absorbed into the body and, in turn, create that sense of wellness.

PART/BUTTON

REMOTE CONTROL

Remote Control Overview

FRONT VIEW

Parts Overview - Front View

BACK VIEW

Parts Overview - Back View

TROUBLESHOOTING

Please check the below troubleshooting solutions for technical advice

Problem	Solution
Not operating	Is the power plug connected properly?
Air quality is not good, but the air purification indicator is "Blue"	The air intake is blocked, or the air purifier is placed very far away from the source of poor air quality. Relocate the air purifier. The Room is too big for the air purifier to react sensitively. Use the air purifier in a smaller room.
The air purifier is not working well	The filter or the air purifier needs cleaning. Clean the filter and appliance according to the manual. The filter needs to be replaced. Replace the filter.

If the above problems still cannot be solved, please contact customer service for advice.

MAINTENANCE

INTERNAL COMPONENTS

Internal Components Overview

Part	Cleaning Method
Machine	Wipe out dust and dirt with a piece of wrung dry cleaning cloth once per month.
Front cover	Wipe out dust and dirt with a piece of wrung-dry cleaning cloth, or wash clean under water once per month. Make sure it is completely dry before putting it back in place.
Dust collection filter	Vaccum the black part of the filter to remove dust and hair collected. You can also clean it by gently tapping the filter over a trash can. Do not vacuum the white part of the filter. Do not wash the filter.

Replace filters every 3 or 6 months, or even more frequently with heavy use.
Please disconnect from power before cleaning or replacing the filter.
Please use neutral cleaning detergents.

Do not use detergents such as alkaline detergents, mineral oil, alcohol or decolourants.

SAFETY AND NOTIFICATIONS

To avoid danger to you and others, pay careful attention to these instructions. Please pay special attention to the following signs:

This sign means death or serious injury may occur if advice is not followed.

caution ATTENTION
This sign means personal injury or damage to property may occur if advice is not followed.

	This action is forbidden.
	Attention is needed.
	Caution.

Do not touch the power plug with wet hands, otherwise you may get an electric shock!

Before you clean the appliance, make sure that it's disconnected from power to eliminate the risk of electric shock.

Only use the appliance with 120V AC power.
Use of other voltage may cause fire.

Don't damage the power cord or socket.
Don't cut, refit, excessively twist and drag the power cord. Don't lay heavy objects on the power cord.
Otherwise it may cause fire. To repair the power cord or plug, please contact an authorised repair center.

Don't subject the appliance to moisture.

Please ensure the plug is completely inserted into the socket to prevent electric shock or fire. Don't use broken plugs or loose power sockets.

Don't drag the power cord when moving or storing the appliance to prevent damage and possible fire or electric shock.

Don't put rod-like instruments or your fingers into the air intakes or outlets.

Don't refit or disassemble the appliance.
Otherwise, it may cause damage.

caution ATTENTION

Don't use alcohol or diluents to clean the appliance, and keep it away from pesticides.

Keep appliance away from flammable materials at all times.

Don't use the appliance in high-temperature areas or areass with high humidity (such as bathrooms), otherwise, it may cause electric shock or fire.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

BEFORE YOU GET STARTED

Please remove the plastic bag surrounding filter before using.

Hold the lower left and right corner of the cover and pull on both sides with force.
Pull up the the cover as shown in the picture.
Remove the front cover.
Remove used filter and then place the new filter into the air purifier housing. Ensure that the pull straps are facing outward.
Replace the cover by placing the tabs on the top of the cover into the slots on the unit.
Push the bottom of the cover into place, then press the lower left and right corners until you hear a clicking sound.

WARRANTY

Your product is guaranteed by us for 12 months from your original date of purchase. If you want to extend your warranty for one more year, please do not hesitate to contact us.
Become a Mooka member and get access to exclusive benefits, such as updates about the latest Mooka products.