EDIFIER TO-U6+ True Wireless In-Ear Headphones Manual

Power ON/OFF

Power ON when taken out of the case.
Power OFF when placed in the case.

Pairing

1. Earbuds placed in the case, open the case lid, press and hold the button of the case about 3s to wait until earbuds Orange LED blink rapidly.
2. Select "EDIFIER TO-U6+ L" or "EDIFIER TO-U6+ R" in your device setting to connect, earbuds Orange LED will blink twice in 5s after connected.
3. Take out one or both earbuds as needed for use.

Note:
For subsequent use, the earbuds will auto-connect to device used last time.

Reset

Earbuds placed in the case, open the case lid, press and hold the button of the case about 10s, earbuds Orange LED will be steady lit for about 3s, then the pairing record will be cleared.

Left & Right connection

1. Both earbuds placed in the case and open the case lid, press and hold the button of the case about 8s to wait until the earbuds Orange LEDs blink rapidly, then left & right will start connecting.
2. Earbuds Orange LEDs will blink slowly after connected.

Charge

Earbuds

1. When hearing low battery prompt tone, please place the earbuds in the case for charging.
2. Orange LED is steady lit when charging and off when fully charged.

Charging case

1. Please connect the case to power source with the included Type-C charging cable for charging.
2. Orange LED is steady lit when charging and off when fully charged.

Input: 5V 55mA(Earbuds)
5V 500mA(Charging case)

Wireless charging supported

Controls(Wearing both earbuds)

Left Tap Panel	Right Tap Panel
x2	x2
x3	x3
x2	x2
x2	x2
x3	x3

Note:

1. Please do not charge the product when there is sweat or other liquids inside the charging port, which may damage the product.
2. Images are for illustrative purposes only and may differ from the actual product.

For more information, please visit our website: www.edifier.com

@Edifierglobal
@Edifier_Global
@Edifier_Global

Model: EDF200085
Edifier International Limited
P.O. Box 6264
General Post Office Hong Kong

www.edifier.com
2022 Edifier International Limited. All rights reserved. Printed in China

NOTICE:
For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice. Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may be slightly, different from actual product.
If any difference is found, the actual product prevails.