Table of Contents
Advertisement
STEP 4:
(SEE FIGURE 4)
*
Assemble a shoulder bolt, large washer and 3/8" lock
nut to the frame brace and slotted hole on each side
of the bumper.
STEP 5:
(SEE FIGURE 5)
*
Fasten the frame braces to the tractor frame using
four 3/8-16 x 1" carriage bolts and 3/8" whizlock nuts.
NOTE: Only tractor frame shown for clarity.
FIGURE 4
3/8" LOCK NUT
\
\
LARGE
"_
SHOULDER
WASHER
BOLT
3/8-16 x 1"
CARRIAGE
BOLT
s
LJ
/
3/8" WHIZLOCK
NUT
._
TRACTOR FRAME
FIGURE 5
TiLT BUMPER
DOWN BEFORE
RAiSiNG
TRACTOR
HOOD:
(SEE FIGURE 6)
*
While pushing in lightly on top of bumper, pull latch
under front of bumper.
*
Keep latch pulled out and pull down on bumper.
LOCK BUMPER
iNTO UP POSiTiON:
(SEE
FIGURE 6)
*
Push bumper up into position. Latch will lock bumper
into place.
\
LATCH
FIGURE 6
©
Call 1-866-576-8388
for missing parts or assembly help
5
DO NOT RETURN TO STORE
Advertisement
Table of Contents
