Establishing A Communications Link - Targus Stow-N-Go AKP01US User Manual

Establishing
Link
After your computer detects the USB receiver and the default driver
software is installed, you may need to establish a communications link
between the receiver and the keypad before you can use it.
1. Plug the receiver into your computer's USB port and turn on the
keypad.
NOTE: MAKE SURE THAT YOUR COMPUTER AND KEYPAD ARE TURNED ON
ANDYOUR COMPUTER HAS DETECTED THE USB RECEIVER BEFORE YOU
ESTABLISHA COMMUNICATIONS LINK.
Battery Cover
On/Off Switch
The LED on the receiver will flash for 30 seconds to indicate ID search
mode.
Targus Wireless Stow-N-Go
a
TM
Keypad
Communications
6
Receiver
Reset Button