Advertisement
Quick Links
Owner's Manual
CRRFr. NRN °
FRONT
Model Nos. 486.245994, 486.245981
Fits 917 Series LT/YT/GT Tractors
DO NOT RETURN TO STORE
For Missing
Parts or Assembly
Questions
Call 1-866-576-8388
CAUTION:
Before using this product,
read
this manual and follow all Safety
Rules and
Operating
Instructions.
• Safety
,, Assembly
,, Operation
,, Maintenance
,, Parts
Sears, Roebuck
and Co., Hoffman
Estates,
IL 60179 U.S.A.
www.craftsman.com
PRINTED IN U.S.A.
FORM NO. 40866 (08/04/07)
Advertisement
Related Manuals for Craftsman 486.245981
Summary of Contents for Craftsman 486.245981
- Page 1 Owner's Manual CRRFr. NRN ° FRONT Model Nos. 486.245994, 486.245981 Fits 917 Series LT/YT/GT Tractors CAUTION: Before using this product, this manual and follow all Safety Rules and Operating Instructions. Sears, Roebuck and Co., Hoffman www.craftsman.com PRINTED IN U.S.A. read Estates, IL 60179 U.S.A.
-
Page 2: Warranty
Sears store or other Craftsman outlet in the United States for free replacement. This warranty is void if this product is ever used for commercial or rentaJ purposes. - Page 3 iNSTRUCTiONS STEP 1 : (SEE FIGURE 2) Open parts bag labelled "A" and verify that all parts are present. NOTE: Place cardboard or a mat on work surface to prevent scratching of parts removed from carton and tractor. STEP 2: (SEE FIGURE 3) Remove tractor hood.
- Page 4 STEP 5: (SEE FIGURE 6) Spread ends of bumper enough to fit slots onto bolts in rear mounting holes in tractor frame. The bumper has three mounting holes. The rear hole provides the most clearance while the forward holes provide a neater appearance. Use a hole that provides enough clearance for hood to stay in raised position when opened.
- Page 5 INSTRUCTIONS STEP 1 : (SEE FIGURE 2) Open parts bags labelled "A" and "B" and verify that all parts needed are present. NOTE: Place cardboard or a mat on work surface to prevent scratching of parts removed from carton and tractor. NOTE: Not all hardware will be used.
- Page 6 STEP 3: (SEE FIGURE 4) • Place plug on a work bench or solid table and push end of bumper down onto plug. Repeat for second plug. STEP 4: (SEE FIGURE 5) Remove any bolts present in front mounting holes in side of tractor frame.
- Page 7 STEP 5: (SEE FIGURE 6) Spread ends of bumper enough to fit slots onto bolts in rear mounting holes in tractor frame. The bumper has three mounting holes. The rear hole provides the most clearance while the forward holes provide a neater appearance. Use a hole that provides enough clearance for hood to stay in raised position when opened.
- Page 8 For repair - in your home - of all major brand appliances, lawn and garden equipment, no matter who made it, no matter who sold it! For the replacement owner's manuals that you need to do-it-yourself. For Sears professional and items like garage door openers and water heaters. 1-800-4-MY-HOME Call anytime, For expert home solutions...