Page 1
Dear Imesa customer! Welcome to the family of Imesa customers. We hope that you will have many years of use from your new machine. The machine has many features. To make the most of its functions, we recommend that you read the operating instructions before using the machine. The operating instructions include information on how you can help protect the environment.
CONTENTS BEFORE USING YOUR MACHINE FOR CARE AND CLEANING THE FIRST TIME Cleaning the lint fi lter Language selection Cleaning the outside of the machine Laundry labels TROUBLESHOOTING SAFETY INSTRUCTIONS The machine will not start General The machine loses all power during a program Safety Drying takes too long Installation...
BEFORE USING YOUR MACHINE FOR THE FIRST TIME LANGUAGE SELECTION You will be prompted to select the display language when you have connected your machine and start it for the fi rst time. Do as follows: 1. Turn the programme selector to choose from: US English, English, Svenska, Dansk, Norsk, Suomi, Français, Deutsch, Italiano, Espanol, Русский, Nederlands.
SAFETY INSTRUCTIONS GENERAL • This machine can be used by children aged 8 and upwards, and by people Read the operating with reduced physical capacity, instructions and keep them in mental ability, memory loss or lacking a safe place! experience and knowledge. These •...
SAFETY INSTRUCTIONS SAFETY RECYCLING • The machine must not be used for This machine is manufactured and drying items that have been dry- labelled for recycling. In order to prevent cleaned at home or fabrics that may personal injury, the machine must be contain residues of fl...
SAFETY INSTRUCTIONS CHILD SAFETY ACTIVATING/DEACTIVATING CHILD- SAFE START WARNING! Do as follows to open the settings DO NOT ALLOW CHILDREN TO menu: PLAY WITH THE TUMBLE DRYER. 1. Turn off the machine using the main • If the door is opened when a power switch.
ADVICE AND TIPS BEFORE YOU TUMBLE-DRY Here are some tips that may help you before you begin STATIC ELECTRICITY tumble-drying. To reduce the risk of static electricity in the laundry after tumble drying you can: HAVE THE CLOTHES BEEN SPUN? •...
TUMBLE DRYING Below are step-by-step instructions to help you achieve Press the main power switch until the display lights. Open the best possible tumble-drying results. the door, load the items and then close the door. NOTE! SORT YOUR FABRICS Make sure that objects e.g. detergent dispensing balls, You will achieve the most uniform drying results if the have been removed from the laundry.
TUMBLE DRYING PRESS THE START BUTTON. Remaining drying time An estimate of the remaining drying time will be shown on the display a few minutes after the drying programme starts. For example, 1:35 means that it will take approximately 1 hour and 35 minutes for the load to dry. If the option.Anti crease has been selected, the drum will rotate for three seconds per minute for two hours after the programme is fi...
SETTINGS YOU CAN CARRY OUT THE FOLLOWING CHILD-SAFE SETTINGS You can activate the Child-safe start option to prevent children from starting the machine. • Language • Child-safe 1. Turn the programme selector and choose ”Child-safe start on” or ”Child-safe start off ”. •...
CARE AND CLEANING 4. To close the lint fi lter, follow the reverse order of steps CLEANING THE LINT FILTER used for opening. Then, replace the fi lter by sliding it The lint fi lter must be cleaned after each load. back into the door.
TROUBLESHOOTING ERROR MESSAGES NOTE! • Read Drying takes too long in this chapter if Max When starting the tumble dryer for the fi rst time or program time appears on the display. after a long period without use, you may notice a slight thumping noise.
TECHNICAL INFORMATION TECHNICAL DATA Height: 850 mm Width: 595 mm Depth: 745 mm Weight (net): 45 kg Cylinder volume: 145 l Max. drying capacity: 8 kg Speed: 50-55 rpm Sound pressure level: The sound pressure level is below 70 dB(A) Rated power: See type plate.
SERVICE BEFORE CONTACTING THE SERVICE DIVISION See the Troubleshooting and Care and cleaning chapters to see whether you can rectify the problem. If you need to contact the service division, make sure that you know the model designation, type designation and serial number. The model designation (1) can be found on the fi...
HOW TO ASSEMBLE THE STACK Remember that the tumble dryer produces heat and 1. Undo the screw on the back of the IMESA washing should therefore not be located in a room that is too small. machine as shown in the fi gure.
INSTALLATION 6. Slide the dryer backward until it reaches the anti- tipping bracket. Make sure the front of the appliance is raised by 50 to 150 mm as you slide it back. ADJUSTING THE FEET Screw the feet in or out so that the tumble dryer is steady and balanced on the fl...
INSTALLATION AIR EVACUATION CONNECTION TO THE EVACUATION DUCT Waste air from the tumble dryer must be taken to an evacuation duct or to an outlet in the wall using the vent The vent hose must take the shortest and straightest hose supplied.
INSTALLATION ACCESSORIES INSTALLING THE AIR EXHAUST SYSTEM If the vent hose runs to an outlet in the wall, you can If several tumble dryers are connected to an air exhaust prevent the infl ow of cold air by fi tting a ventilation grill. system, a non-return fl...
INSTALLATION ELECTRICAL INSTALLATION Connect the machine by plugging it into an earthed wall socket. The electrical wall socket must be placed outside of the installation area to be easily accessible. CONNECTION ON DELIVERY • 230 V, 1-phase, 16 A • 50 Hz •...
DOOR HANGING 1. Hinge pins (top and bottom) 4. Locking hook 2. Cover plate 5. Hinges (left + right side) 3. Plastic plugs (on the upper and lower edges) 6. Plinth...
Page 22
DOOR HANGING You can choose whether the door is hung on the right or 6. Loosen the screws (13 in total) on the inside of the the left. door. Follow these instructions: 1. Remove the plinth. 2. Remove the hinge, two screws. 7.
End appears on the display when the program is fi nished. Clean the lint fi lter after each load. Turn off the main power switch and close the door. We reserve the right to make changes. TD80.C SPO ES80PEE IMS en (01-18)
Need help?
Do you have a question about the ES80PEE and is the answer not in the manual?
Questions and answers