Page 1
Dear Imesa customer! Welcome to the family of Imesa customers. We hope that you will have many years of use from your new machine. The machine has many features. To make the most of its functions, we recommend that you read the operating instructions before using the machine. The operating instructions include information on how you can help protect the environment.
CONTENTS BEFORE USING YOUR MACHINE FOR THE CARE AND CLEANING FIRST TIME Cleaning the lint filter Language selection Emptying the condensed water container Laundry labels Cleaning the evaporator filter and evaporator SAFETY INSTRUCTIONS Cleaning the outside of the machine TROUBLESHOOTING General Safety The machine will not start...
BEFORE USING YOUR MACHINE FOR THE FIRST TIME LANGUAGE SELECTION You will be prompted to select the display language when you have connected your machine and start it for the first time. Do as follows: 1. Turn the programme selector to choose from: US English, English, Svenska, Dansk, Norsk, Suomi, Français, Deutsch, Italiano, Espanol, Русский, Nederlands.
SAFETY INSTRUCTIONS GENERAL • This machine can be used by children aged 8 and upwards, and by people Read the operating with reduced physical capacity, instructions and keep them in mental ability, memory loss or lacking a safe place! experience and knowledge. These •...
SAFETY INSTRUCTIONS SAFETY INSTALLATION • The machine must not be used for See the section Installation. drying items that have been dry- WARNING! cleaned at home or fabrics that may Do not start the machine until it has contain residues of flammable liquids. been in position for 24 hours.
SAFETY INSTRUCTIONS CHILD SAFETY ACTIVATING/DEACTIVATING CHILD- SAFE START. WARNING! Do as follows to open the settings DO NOT ALLOW CHILDREN TO menu: PLAY WITH THE TUMBLE DRYER. • If the door is opened when a 1. Turn off the machine using the main programme is running the garments power switch.
DESCRIPTION OF THE TUMBLE DRYER 1. Main power switch 5. Lint filter 2. Condensed water container 6. Outer door 3. Panel 7. Heat pump and filter 4. Type plate...
ADVICE AND TIPS BEFORE YOU TUMBLE-DRY STATIC ELECTRICITY Here are some tips that may help you before you begin tumble-drying. To reduce the risk of static electricity in the laundry after tumble drying you can: HAVE THE CLOTHES BEEN SPUN? •...
TUMBLE DRYING Below are step-by-step instructions to help you achieve Press the main power switch until the display lights. Open the best possible tumble-drying results. the door, load the items and then close the door. NOTE! SORT YOUR FABRICS Make sure that objects e.g. detergent dispensing balls, You will achieve the most uniform drying results if the have been removed from the laundry.
TUMBLE DRYING PRESS THE START BUTTON. TIP! An estimate of the remaining drying time will be shown Clean the lint filter in the outer door after each load. See on the display a few minutes after the drying programme the Care and cleaning chapter. starts.
SETTINGS YOU CAN CARRY OUT THE FOLLOWING CHILD-SAFE SETTINGS You can activate the Child-safe start option to prevent children from starting the machine. • Audible Volume • Language 1. Turn the programme selector and choose ”Child-safe start on” or ”Child-safe start off”. •...
CARE AND CLEANING CLEANING THE LINT FILTER 3. Use your hand or a soft cloth to remove the lint from all sides of the filter. If necessary, use a damp The lint filter must be cleaned after each load. sponge and a small amount of washing-up liquid to 1.
CARE AND CLEANING EMPTYING THE CONDENSED WATER CLEANING THE EVAPORATOR FILTER CONTAINER AND EVAPORATOR Clean the evaporator and the evaporator filter at the intervals shown on the machine’s display or more often. 1. Turn off the Main power switch and open the outer door.
CARE AND CLEANING CLEANING THE AUTO FILTER Clean the filter at the intervals shown on the machine’s display or more often 1. Pull the condensed water container out and up. 2. Unscrew and remove the auto filter. Sealing RECOMMENDATION! Wash the sponge filter in the washing machine after 30 drying cycles (use the rinse or quick wash program).
TROUBLESHOOTING ERROR MESSAGES NOTE! • If Over Flow appears on the display, the condensed When starting the tumble dryer for the first time or water container is full or the evaporator filter is after a long period without use, you may notice a slight blocked.
TECHNICAL INFORMATION TECHNICAL DATA Height: 850 mm Width: 595 mm Depth: 745 mm Weight (net): 62 kg Cylinder volume: 145 l Max. drying capacity: 8 kg Speed: 50-55 rpm Sound pressure level: The sound pressure level is below 66 dB (A) Rated power: See type plate.
SERVICE BEFORE CONTACTING THE SERVICE DIVISION See the Troubleshooting and Care and cleaning chapters to see whether you can rectify the problem. If you need to contact the service division, make sure that you know the model designation, type designation and serial number.The model designation (1) can be found on the first page of the operating instructions and on the machine panel.
INSTALLATION HOW TO ASSEMBLE THE STACK: WARNING! 1. Undo the screw on the back of the IMESA tumble Do not start the machine until it has been in position for dryer as shown in the figure. 24 hours. If for some reason the tumble dryer needs to be laid down for transport or service, it must be laid on its left side viewed from the front.
INSTALLATION CONDENSED WATER 5. Fasten or undo the rear feet of the appliance until it is fully level, either on the floor or on the washing Option 1 allows you to remove the small short hose from machine. the nipple. Attach the rubber hose supplied to the same nipple.
INSTALLATION ELECTRICAL INSTALLATION Connect the machine by plugging it into an earthed wall socket. The electrical wall socket must be placed outside of the installation area to be easily accessible. CONNECTION ON DELIVERY • 230V, 1-Phase, 10A • 50Hz • Use a type A residual-current device. NOTE! Do not connect the machine to the mains electricity supply by an extension lead.
DOOR HANGING 1. Hinge pins (top and bottom) 4. Locking hook 2. Cover plate 5. Hinges (left + right side) 3. Plastic plugs (on the upper and lower edges) 6. Plinth...
Page 22
DOOR HANGING You can choose whether the door is hung on the right or 6. Loosen the screws (13 in total) on the inside of the the left. door. Follow these instructions: 1. Remove the plinth. 2. Remove the hinge, two screws. 7.
The text End appears on the display when the programme is finished. Clean the lint filter after each load. Turn off the main power switch. Close the door. We reserve the right to make changes. TD80.C HP ES80PEHP IMS en (03-17)
Need help?
Do you have a question about the ES80PEHP and is the answer not in the manual?
Questions and answers