Storing Your Machine; Disposing Of The Battery - Bissell CROSSWAVE CORDLESS MAX PROFESSIONAL Manual

Storing Your Machine

Visit BISSELL.com for additional maintenance tips for your machine.
Store CrossWave® Cordless Max in a protected, dry area. Since this product uses water, it must not
be stored where there is danger of freezing. Freezing will damage internal components and may void
the guarantee.

Disposing of the Battery

Go to BISSELL.com for resources on battery disposal.
Before disposing the battery, make sure:
• The machine is disconnected from the 3-in-1 Docking Station.
• The Clean and Dirty Water Tanks are empty or removed from the machine.
• A Phillips-head screwdriver, electrical tape and rubber handled wire cutters are available for
disassembly.
1.
With a Phillips-head
screwdriver, remove the 4
screws on the back of the
machine. Lift off the back
cover.
NOTICE
To reduce the risk of a leaking condition, do not store machine where freezing may occur. Damage to internal
components may result.
NOTICE
Disconnecting the battery will destroy the appliance and void the guarantee.
10 BISSELL.com
2.
Cut the yellow positive (+)
battery wire with wire cutters
and wrap with electrical tape.
Disconnect the connector with
four wires. Lastly, cut the black
wire and wrap with electrical
tape.
3.
Using a Phillips-head
screwdriver, remove the 4
screws located on the sides of
the battery pack and remove it
from the back cover.