Removing The Rechargeable Battery - Remington XR1750AU Use & Care Manual

Table of Contents

Advertisement

Replacement heads & cutters may be obtained directly from Remington
Simply fill out the enclosed accessory order form - refer to page 9 &
10, or alternatively your order can be processed over the phone via the
Remington
Service Hotline.
®

REMOVING THE RECHARGEABLE BATTERY

We strongly recommend that a professional removes the rechargeable
battery. Parts of the shaver case, and tools have sharp edges and may
cause injury if not handled correctly.
The rechargeable battery must be removed from the appliance before
it is scrapped.
Disconnect the charging adapter before removing the battery.
1.
Remove the shaver head (pull the head up and off).
2.
Using a small screwdriver, pry the front panel off the handle.
3.
Unscrew the 3 screws located on front of shaver.
4.
Using a small flat screwdriver, pry the front housing from the body.
5.
Unscrew the 6 screws to open the inner housing.
6.
Take out the circuit board.
7.
Disconnect the battery from the circuit board.
Used batteries must be removed from the appliance and disposed of
at an appropriate official recycling/collection point.
Do not attempt to operate the shaver once you have opened it.
DISPOSAL/RECYCLING
Legislation in some localities mandates that e-waste (anything with a plug,
battery or cord) is disposed of through controlled recycling facilities and
must not be disposed of in general household waste. For more information
about recycling of electrical and battery operated appliances, please
contact your local council or your local household waste disposal service.
This product conforms to radio frequency interference requirements.
Any product purchased and used commercially carries a limited 90 Day Warranty.
Suitable for use in bath and shower.
12
.
®

Advertisement

Table of Contents
loading

This manual is also suitable for:

Limitless x5

Table of Contents