Table of Contents
Advertisement
CARE FOR YOUR SHAVER
Care for your shaver to ensure a long lasting performance. We recommend you clean
your shaver after each use.
•
Ensure your shaver is switched off before cleaning.
1.
Open the shaver head by pressing the release button (Fig. C).
2.
The head assembly will open (Fig. D).
3.
Rinse under a tap to wash away hair trimmings.
4.
Carefully brush away any hairs from the cutters.
5.
Snap the head assembly closed.
Note: The individual cutters are designed to be permanently retained in the shave head
and flushed out with water. Do not remove the individual cutters for cleaning.
DETAIL TRIMMER
Lubricate the teeth of the detail trimmer every six months with a drop of sewing machine
oil.
REMOVING THE RECHARGEABLE BATTERY
We strongly recommend that a professional removes the rechargeable battery. Parts of
the shaver case, and tools have sharp edges and may cause injury if not handled
correctly.
•
The rechargeable battery must be removed from the appliance before it is
scrapped.
•
Disconnect the charging adapter before removing the battery.
1.
Remove the shaver head (pull the head up and off).
2.
Using a small screwdriver, pry the front panel off the handle.
3.
Unscrew the 3 screws located on front of shaver.
4.
Using a small flat screwdriver, pry the front housing from the body.
5.
Unscrew the 6 screws to open the inner housing.
6.
Take out the circuit board.
7.
Disconnect the battery from the circuit board.
•
Used batteries must be removed from the appliance and disposed of at an
appropriate official recycling/collection point.
•
Do not attempt to operate the shaver once you have opened it.
7
Advertisement
Table of Contents
