Do you have a question about the X9 Limitless and is the answer not in the manual?
Questions and answers
Mark Watkins
April 15, 2025
Could you please explain to me how to remove the shaver blades to change them and clean them.
1 comments:
Mr. Anderson
April 15, 2025
To remove and clean the shaver blades on the Remington X9 Limitless, follow these steps:
1. Switch off the shaver. 2. Remove the front panel from the handle. 3. Unscrew the 3 screws on the front of the shaver. 4. Use a small flat screwdriver to pry the front housing from the body. 5. Unscrew the 6 screws to open the inner housing. 6. Carefully take out the circuit board (note: this step is more related to disassembly than regular cleaning). 7. Do not attempt to operate the shaver once opened.
For regular cleaning, rinse the head and cutters under warm water after use, especially if shaving gel was used.
Page 1
X9 Limitless Rotary Shaver XR1790 I remington-europe.com Register online for an EXTRA year guarantee Visit uk.remington-europe.com/product-registration You must register within 28 days of purchase.
Thank you for buying your new Remington® product. Please read these instructions carefully and keep them safe. Remove all packaging before use. IMPORTANT SAFEGUARDS • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been supervised/instructed and understand the hazards involved.
INSTRUCTIONS FOR USE SHAVING Switch the shaver on by pressing the on/off button. Stretch the skin with your free hand so the hairs stand upright. Only apply light pressure on the shaving head while shaving (pressing too hard can cause skin irritation). Use short, circular strokes.
CARE FOR YOUR SHAVER Care for your shaver to ensure a long lasting performance. We recommend you clean your shaver after each use. • Ensure your shaver is switched off before cleaning. Open the shaver head by pressing the release button (Fig. C). The head assembly will open (Fig.
Cuba, Iran, North Korea, Syria and the Crimea region. Register at: https://uk.remington-europe.com/product-registration Consumables are guaranteed only for their recommended lifecycle. Replacement/spare parts* are excluded and are only covered by a 1 year warranty.
SERVICE CENTRE UNITED KINGDOM IRELAND G 0800 212 438 (free call mainland UK) G 142 951 40 Spectrum Brands (UK) Ltd Remington Consumer Products, Fir Street, Failsworth, Manchester Unit B12, Ballymount Corporate Park, M35 0HS, UK Ballymount, Dublin 12 www.remington.co.uk https://ie.remington-europe.com...
Need help?
Do you have a question about the X9 Limitless and is the answer not in the manual?
Questions and answers
Could you please explain to me how to remove the shaver blades to change them and clean them.
To remove and clean the shaver blades on the Remington X9 Limitless, follow these steps:
1. Switch off the shaver.
2. Remove the front panel from the handle.
3. Unscrew the 3 screws on the front of the shaver.
4. Use a small flat screwdriver to pry the front housing from the body.
5. Unscrew the 6 screws to open the inner housing.
6. Carefully take out the circuit board (note: this step is more related to disassembly than regular cleaning).
7. Do not attempt to operate the shaver once opened.
For regular cleaning, rinse the head and cutters under warm water after use, especially if shaving gel was used.
This answer is automatically generated