Magtek DynaFlex II Go Manual page 8

2 - General Description
The product label includes the following elements of device identification information, shown by the
numbered callouts in Figure 2-4 and Figure 2-5.
1) Product Name
2) PCI Hardware Identifier ("HW")
The label also contains other supporting information about the device.
All DynaFlex II Go product family hardware configurations are listed in Table 2-1 below. The device
utilizes two interface types, USB and Bluetooth LE. Use of any interface other than USB or Bluetooth
LE will invalidate PCI approval.
Table 2-1 - PCI Hardware Identifier
PCI ID Tag
42PCI30U0BB0 DynaFlex II Go, PCI, BLACK
42PCI50U0BB0 DynaFlex II Go, PCI, BCR, BLACK
42PCI30B0BB0 DynaFlex II Go, PCI, BLACK, BLUETOOTH LE
42PCI50B0BB0 DynaFlex II Go, PCI, BCR, BLACK, BLUETOOTH LE
DynaFlex II Go| Secure Card Reader | PCI PTS POI v6.2 Security Policy
Figure 2-4 -DynaFlex II Go Device Label
Figure 2-5 DynaFlex II Go with Bluetooth LE Device Label
Configuration Description
Page 8 of 18 (D998200596-100)
1
2
1
2