Product Type; Identification; 2.3.1 Hardware Identification - Magtek DynaFlex II Go Manual

2 - General Description
2.2

Product Type

All DynaFlex II Go products include USB communications, magnetic stripe reader (MSR), contact chip
card reader (ICCR), a contactless card reader (CTLS), and may also be purchased with an embedded
barcode reader (BCR) and Bluetooth LE connectivity.
DynaFlex II Go models can be used as desktop or handheld devices. They are approved as a secure card
reader (SCR) under PCI PTS POI v6.2 requirements.
Usage in any other environment will invalidate the approval.
2.3

Identification

2.3.1 Hardware Identification

To find important product identification, look on the printed product label on the back face of the device
as shown in Figure 2-3 below.
DynaFlex II Go| Secure Card Reader | PCI PTS POI v6.2 Security Policy
Do not remove or alter this label.
Figure 2-3 - DynaFlex II Go Device Label Location
Page 7 of 18 (D998200596-100)