2.3.2 Firmware Identification - Magtek DynaFlex II Go Manual
Secure card reader pci pts poi v6.2 security policy
Hide thumbs
Also See for DynaFlex II Go:
- Programmer's manual (301 pages) ,
- Installation and operation manual (55 pages) ,
- Document (2 pages)
Table of Contents
Advertisement
2 - General Description
2.3.2 Firmware Identification
The most recent firmware versions for DynaFlex II Go products are
for the
1000009446-AA0-PCI
secure bootloader (Boot1 FW),
for the core firmware (Main FW), and
1000009421-AA0-PCI
for the Bluetooth LE Firmware Version. The lowercase x in firmware versions
1000009327-AA0-PCI
indicates minor non-security related changes. The secure bootloader firmware version also covers the
initial bootloader (Boot0) permanently programmed into the device. Any changes to either Boot0 or
Boot1 will result in a change to the Boot1 FW version that is visible to the user, reported by the device,
and listed on the PCI Approved Devices website.
All device identification information, including firmware versions and PCI Hardware ID, is accessible by
connecting DynaFlex II Go to a host device via USB or Bluetooth LE, using the latest software provided
by MagTek, as seen in Figure 2-6 - Device Information Screen.
The host user can also can retrieve device information at any time using Command 0xD101 Get
Property as described in D998200597 DynaFlex II Go Programmer's Manual (COMMANDS).
Figure 2-6 - Device Information Screen
DynaFlex II Go| Secure Card Reader | PCI PTS POI v6.2 Security Policy
Page 10 of 18 (D998200596-100)
Advertisement
Table of Contents
Need help?
Do you have a question about the DynaFlex II Go and is the answer not in the manual?
Questions and answers