Introduction; Intended Use; Features; Package Contents - Parkside 311903 Translation Of The Original Instructions

ANGLE GRINDER PWS 230 C3

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

The appliance is intended for the cutting and
rough cutting of metal materials, concrete and
tiles without the use of water. Any other usage of
or modification to the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage(s) resulting from improper usage. The
appliance is not intended for commercial use.

Features

Appliance handle (rotatable)
ON/OFF switch
Safety lock-out
Release button
Cover for carbon brushes
Additional handle
Blade guard
Mounting ring
Screws
Blade guard fixture
Spindle locking button
Screw thread (3 x) for the additional handle
Clamping nut (see fig. C)
Attachment spindle (see fig. C)
Attachment flange (see fig. C)
Two-hole mounting spanner (see fig. D)
Bulges
│ GB │ IE
■ 18

Package contents

1 angle grinder PWS 230 C3
1 additional handle
1 blade guard
1 two-hole mounting spanner
1 operating manual

Technical data

Rated voltage:
Rated power
consumption:
Rated speed:
Disc width:
Thread size:
Protection class:
Noise and vibration data:
Noise measurement value determined in accor-
dance with EN 60745. The A-rated noise level of
the power tool is typically as follows:
Noise emission value:
Sound pressure level: L
Uncertainty:
Sound power level:
Uncertainty:
Wear hearing protection!
Total vibration value:
Surface sanding:
Uncertainty:
230 V ∼, 50 Hz
(AC)
2000 W
n 6500 rpm
Ø 230 mm
M14
II / (double insulation)
= 94 dB(A)
PA
K= 3 dB
L = 105 dB(A)
WA
K= 3 dB
A = 16.4 m/s 2
h, AG
K = 1.5 m/s 2
PWS 230 C3