Omron 1S Series Startup Manual page 16
Programmable multi-axis controller
Hide thumbs
Also See for 1S Series:
- User manual (976 pages) ,
- Startup manual (100 pages) ,
- Instruction manual (89 pages)
Table of Contents
Advertisement
8
In the Device Properties dialog box,
click the No Device button.
This operation sets the Controller to
the offline state.
9
Restart the Controller.
The servo frequency that has been
set is reflected.
10
Wait until the startup process of the
Controller is complete. Then click
Delta Tau – Communication Setup
on the toolbar to display the Device
Properties dialog box.
In the Communication Setup dialog
box, click the Connect button.
This operation sets the Controller to
the online state.
16
Advertisement
Table of Contents
