Advertisement
Assembly — Hanging the Fan
1
Installing the mounting plate to the
electrical box
WARNING: To reduce the risk of re, electric shock or
other personal injury, mount the fan only to an outlet box or
supporting system marked acceptable for fan support and
use the mounting screws provided with the outlet box.
Attach the mounting plate (A) to the outlet box (not included)
with two screws and washers provided with the outlet box.
Ensure the mounting plate (A) is tight and secured.
2
Hanging the fan to the mounting plate
Make sure the slot openings of the canopy ring (B) are on
top, and then slip the canopy ring (B) onto the fan motor
assembly (C).
Carefully lift the fan motor assembly (C) up to the mounting
plate (A) and hang the fan on the hook (DD) provided using one
Outlet Box
of the holes at the outer rim of the fan motor assembly (C).
A
B
C
7
WARNING: The hook is only to hold the fan while attaching
wiring. Failure to hang as instructed may result in the hook
breaking causing the fan to fall. The hook must pass from the
inside to the outside of the fan motor assembly.
Please contact 1-855-HD-HAMPTON for further assistance.
A
DD
HAMPTONBAY.COM
Advertisement
