Clarion PH-2416N Service Manual

Clarion PH-2416N Service Manual

Honda automobile genuine am/fm radio cd stereo

Advertisement

Quick Links

SPECIFICATIONS
Radio setion
Receive range:
Intermediate frequency: FM
Quieting sensitivity:
S/N ratio:
Auto tuning stop sensitivity:
CD section
Usable disc:
S/N ratio:
Separation:
General
Load impedance:
Output power:
Power supply voltage:
Current consumption:
Dimensions(mm):
Weight:
* Specification and design are subject to change without
notice for further improvement.
Clarion Co., Ltd.
50 Kamitoda, Toda-shi, Saitama 335-8511 Japan
Service Dept.: 5-66 Azuma , Kitamoto-shi, Saitama 364-0007 Japan
Tel: +81-48-541-2335 / 2432 FAX: +81-48-541-2703
FM
87.75MHz,
87.9MHz to 107.9MHz
AM
530kHz to 1,710kHz
10.7MHz+0.2/-0.2MHz
AM
450kHz+3/-3kHz
FM
Less than 12dBu
(at 30dB S/N)
AM
Less than 35dBu
(at 20dB S/N)
FM
More than 45dB
AM
More than 40dB
FM
24dBu+6/-6dBu
AM
35dBu+6/-6dBu
Compact disc
More than 60dB
More than 55dB
4ohm x 4
More than 30W x 4
DC13.2V(10.8V to 15.6V)
Negative ground
Less than 1.5A
187.5(W)x60(H)x171(D)
1.65kg
Service Manual
HONDA Automobile Genuine
AM/FM Radio CD Stereo
PH-2416N
Model
(Genuine No. 39100-S3Y-A100)
(ID No. 4XQ0)
NOTE
* We cannot supply PWB with component parts in principle.
When a circuit on PWB has failure, please repair it by com-
ponent parts base. Parts which are not mentioned in ser-
vice manual are not supplied.
* Prevent damage caused by static electricity when repair-
ing the pick-up.
The pattern of the pick-up is short-circuiting for prevention.
Remove the soldering with a solder iron whose insulation
resistance is larger than 10Mohm(DC500V) after complete
connection to the main PWB
For repair table shall use copper or conductive sheet (with
impedance is lower to 100Mohm from 1Mohm)such as a
sheet.
Be sure to put on a wrist-strap for prevent electric
static's.(with impedance is to 100Mohm from 1Mohm) The
strap works to drain away the static electricity build-up on
the human body.
And as static electricity build-up on clothes is not drained
away, be careful and not your clothes to touch the pick-up.
Position of short soldering for pick-up protection position is
different by model.
Some units have two short soldering points.
Always short LD circuit to open the short circuit and re-
moves by soldering iron.
COMPONENTS
PH-2416N-A
1.
Main unit
2.
Identification card
(Anti-Theft Radio)
3.
Label
(Serial No./Anti-Theft)
- 1 -
Published by Service Dept.
298-6117-00 Oct.2003 P
Printed in Japan
-----------
1
287-1681-05
1
290-7868-03
1
PH-2416N

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PH-2416N and is the answer not in the manual?

Questions and answers

Summary of Contents for Clarion PH-2416N

  • Page 1 Clarion Co., Ltd. Published by Service Dept. 50 Kamitoda, Toda-shi, Saitama 335-8511 Japan 298-6117-00 Oct.2003 P Service Dept.: 5-66 Azuma , Kitamoto-shi, Saitama 364-0007 Japan Printed in Japan Tel: +81-48-541-2335 / 2432 FAX: +81-48-541-2703 Service Manual HONDA Automobile Genuine AM/FM Radio CD Stereo...
  • Page 2: Anti-Theft System

    2. Place the parts and wiring back in their original positions clean the lens, apply a small amount of isopropyl after replacement or re-wiring. alcohol to lens paper and wipe the lens gently. For proper circuit construction, use of insulation tubes, - 2 - PH-2416N...
  • Page 3: Block Diagram

    Clock accuracy 1. Turn on the ACC switch,and push the POWER button. Universal timer 2. Set a universal timer to TP101(T-BASE), and adjust TC102 so that a reading of the meter is 0 to 1.0 sec./day. - 3 - PH-2416N...
  • Page 4 57: AREA 1 : IN : Destination setting input. Ref. Table 1. pin 58: AREA 2 : IN : Destination setting input. Ref. Table 1. pin 59: Clock ON_/OFF : IN : Clock ON_/OFF initial setting input. - 4 - PH-2416N...
  • Page 5: Exploded View

    SWITCH PWB 335-6567-00 DISC GUIDE 016-0014-05 VR-W-SHAFT 335-6566-00 DISC INDICATOR 017-0433-87 PILOT LAMP(14V40mA) 347-6410-00 DOUBLE FACE(50m) 017-0429-21 PILOT LAMP(8V105mA) 345-8188-20 ESCUTCHEON RUBBER 013-6201-50 PUSH SWITCH 716-0872-11 PAD SCREW(M1.7x6) 074-1151-20 OUTLET SOCKET (20P) 716-1889-00 SCREW(M2.6x5) 001-0518-96 LED - 5 - PH-2416N...
  • Page 6: Main Section

    716-0878-00 IT SCREW(M2.6x5) 092-0702-00 ANT RECEPT 714-2303-81 MACHINE SCREW (M2.3x3) 313-1824-00 HEAT SINK 714-2606-81 MACHINE SCREW (M2.6x6) 716-1494-00 IT SCREW (M2.6x6) 345-4138-00 RUBBER PARTS 714-2612-81 MACHINE SCREW (M2.6x12) 347-2022-02 PAPER PARTS 714-2606-81 MACHINE SCREW (M2.6x6) 714-2606-11 MACHINE SCREW(M2.6x6) - 6 - PH-2416N...
  • Page 7 716-1733-00 SCREW(M1.7x2.3) 750-3099-00 ES-SPRING 750-3097-03 CLAMPER SPRING 816-2373-00 LEAD WIRE(WHT) 816-2372-00 LEAD WIRE(BLU) ----------- CD PWB 001-0563-00 LED 716-1670-00 SCREW(M2x4) 620-0803-00 CE-SP PLATE 750-3096-01 DR-SPRING R 750-3164-00 DR-SPRING LR 750-3188-00 DR-SPRING F-B 750-3201-00 DR-SPRING F-R 039-1768-00 FPC - 7 - PH-2416N...
  • Page 8 CD mechanism section (Main chassis) - 8 - PH-2416N...
  • Page 9 620-0492-01 MOTOR BRACKET 622-1219-01 SHIFT ROLLER 801-4910-60 VINYL-COAT-WIRE(BRN) 714-2603-81 SCREW(M2.6x3) 620-0773-01 CD-MECH-BRKT 966-0308-11 CHASSIS ASSY 800-4910-60 VINYL-COAT-WIRE(BLK) 714-2003-81 SCREW(M2x3) 621-0402-02 U-DISC GUIDE-F 716-1670-00 SCREW(M2x4) 621-0243-02 ROLLER SLEEVE 620-0804-00 CE-SP PLATE F 800-4904-60 VINYL-COAT-WIRE(BLK) 750-3348-00 CENTER SPRING 750-3189-00 SIDE-L-SPRING - 9 - PH-2416N...
  • Page 10: Electrical Parts List

    C255 178-3922-78 3900pF C405 168-1045-56 0.1uF Q402 190-1162-00 2SA1162 C256 178-4722-78 4700pF C406 168-1045-56 0.1uF Q403 125-2004-92 RN1402 C257 178-1232-78 0.012uF C407 168-4735-56 0.047uF Q404 192-2712-00 2SC2712 C258 178-1532-78 0.015uF C408 168-1045-56 0.1uF Q406 125-2004-92 RN1402 - 10 - PH-2416N...
  • Page 11 119-1521-15 1/10W 1.5k ohm R360 119-1021-15 1/10W 1k ohm R538 119-2241-15 1/10W 220k ohm SMA-151-100 SPINDLE 013-7100-00 SPPB11 039-0585-01 PWB R236 119-6821-15 1/10W 6.8k ohm R361 119-1021-15 1/10W 1k ohm R539 119-3331-15 1/10W 33k ohm SMA-146-100 SLED - 11 - PH-2416N...
  • Page 12: Circuit Diagram

    TP101 (CLOCK) TC102 (CLOCK) 1200p CATS-ROM *To J3 of CD PWB M30622MAA-F54GP 4.7K Radio/CD System Control R466 JW Buffer 1200p 4.7K BL-ON Audio+8V Remocon REM+5V CD+5V CD+8V CATS/CD IND-SW ACC-DET RESET B/U-DET ILL-ON *To P701 of Switch PWB -12- PH-2416N...
  • Page 13: Printed Wiring Board

    SOLDER SIDE: Parts on the solder side seen from the solder side are indicated. R272 R274 TP101 TP101 TC102 TC102 Main PWB(B1) *To J3 of CD PWB *To P701 of Switch PWB - 13 - PH-2416N...
  • Page 14: Solder Side

    PRINTED WIRING BOARD Main PWB section (B1) SOLDER SIDE Main PWB(B1) PH-2416N -14-...
  • Page 15 COMPONENT SIDE: Parts on the Switch PWB section (B2) Switch PWB section (B2) component side seen from the component side are indicated. SOLDER SIDE: Parts on the solder side seen from the solder side are COMPONENT SIDE SOLDER SIDE indicated. - 15 - PH-2416N...
  • Page 16 CIRCUIT DIAGRAM CD mechanism section (B3-B6) CD PWB(B3) Limit switch PWB(B6) Sensor PWB(B4) Motor Driver Chucking switch PWB(B5) *To Pick up unit CD control RF AMP *To J301 of Main PWB -16- PH-2416N...
  • Page 17 COMPONENT SIDE: Parts on the component side seen from the component side are indicated. Sled motor SOLDER SIDE: Parts on the solder (SMA-146-100) side seen from the solder side are indicated. COMPONENT SIDE Spindle motor (SMA-151-100) CD PWB(B3) - 17 - PH-2416N...
  • Page 18 PRINTED WIRING BOARD CD mechanism section (B3-B5) Pick up unit (969-0008-12) SOLDER SIDE Chucking switch PWB(B5) CD PWB(B3) Loading motor (SMA-147-100) Sensor PWB(B4) PH-2416N - 18 -...

Table of Contents