* High quality, compact unit with a separate electrode that is designed for easy operation * Water resistant front panel with easy to read LCD display and rubberised function keys Unpacking Please check that the shipment includes the following items: • Lovibond SensoDirect Con110 ® • Lovibond SensoDirect Conductivity Sensor ®...
4. TAKING MEASUREMENTS 1) Connect the Conductivity Electrode (Figure 1, 12) to the Electrode Input Socket (Figure 1, 7). 2) Power on the instrument by pressing the Power ON Button. 3) Select the 2 mS/cm or 20 mS/cm range by pressing the appropriate range button (Figure 1, 5 or 6).
6. CHANGING THE BATTERY i) „ “ in the left corner of the display indicates that it is necessary to replace the battery. However, accurate measurements may still be made for several hours after the “Low Battery” indicator first appears. ii) Remove the protective cover before replacing the battery.
Need help?
Do you have a question about the Tintometer SensoDirect Con110 and is the answer not in the manual?
Questions and answers