20
www.electrolux.com
5.3 Options Setting
1. If you want your laundry to be spun
or use temperature different from the
one proposed by the washer - dryer,
press "Spin" and "Temp" touchpads
repeatedly to change the spin speed
and temperature.
Press the option touchpads, if you
want your laundry to be washed with
special functions.
• Different functions can be
combined which is dependent on
the program selected.
• If an option is not compatible with
the wash program selected, the
symbol "
display along with buzzer sound.
2. If you want to define the end of the
washing program, press the "Delay
Start" touchpad repeatedly to choose
your washer - dryer delay time.
5.4 Starting A Cycle (
To start a program, press the Start/Pause
touchpad. The corresponding pilot light
will stop flashing and a default program
duration will be displayed on the screen.
After approx. 15 minutes from the start of
a program:
• The appliance will automatically
adjust the selected program duration
according to the type and size of the
load.
• The display will show adjusted
program duration.
NOTE
If you press any touchpad while a pro-
gram is operating, the symbol
"
buzzer sound. (except Start/Pause
touchpad and On/Off button)
NOTE
" will flash on
" will flash on display along with
5.5 Interruption Of A Program
• To pause, press Start/ Pause.
The indicator will start flashing.
• Press the Start/Pause again.
The program will continue.
5.6 Changing A Program
Changing a running program is possible
only by switching off the appliance.
• Press the "On/Off" button to cancel
the program and to turn off the
appliance.
• Press the "On/Off" button again to
start the appliance.
Now you can set a new wash program
and change any available options. Press
Start/Pause to start the new program.
NOTE
The appliance will not drain the water
(except programs; Spin, Rinse + Spin,
Tub Clean).
)
5.7 Changing The Options
It may be possible to change some of
the options after a wash program has
started.
1. Press the touchpad Start/Pause. The
indicator will start flashing.
2. If available change the options that
you wish.
3. Press Start/Pause again. The program
will continue.