Options Setting; Starting A Cycle; Interruption Of A Program; Changing A Program - Electrolux EWW14023 User Manual

5.3 Options Setting

If you want your laundry to be spun
1.
or use temperature different from
the one proposed by the
washer-dryer, pess the Spin "
and the temperature "
repeatedly to change the spin speed
and temperature.
Press the option touchpads, if you
want your laundry to be washed with
special functions.
NOTE
-
Different functions can be
combined which is dependent on
the program selected.
-
If an option is not compatible with
the wash program selected, symbol
" " will flash on display along
with buzzer sound.
2.
If you want to adjust washing time,
press the "Time Manager
touchpad repeatedly to increase or
decrease washing time. See Time
Manager guide on page 15.
If you want to delay the start of the
washing program, press the "Delay
Start " touchpad repeatedly to
choose your washer-dryer delay
time.

5.4 Starting A Cycle "

To start a program, press the
Start/Pause
The corresponding pilot light will stop
flashing and a default program duration
will be displayed on the screen.
-
If you press any touchpad while a
program is operating, symbol "
will flash on display along with buzzer
sound. (except "Start/Pause"
touchpad and "On/Off" button)
-
If you turn the program selector knob
to another program when the
machine is working, symbol "
will flash on display along with buzzer
sound to indicate a wrong selection.
The machine will not perform the
new selected program.
" touchpads
"
"
touchpad.
-
The appliance will automatically adjust
the selected program duration
according to the type and size of the
"
load.
-
The display will show adjusted
program duration.

5.5 Interruption Of A Program

-
To pause, press Start/ Pause
indicator will start flashing.
-
Press the Start/Pause
program will continue.

5.6 Changing A Program

Changing a running program is possible
only by switching off the appliance.
-
Press the "On/Off" button to cancel
the program and to turn off the
appliance.
-
Press the "On/Off" button again to
start the appliance.
Now you can set a new wash program
and change any available options. Press
Start/Pause

5.7 Changing The Options

It may be possible to change some of the
options after a wash program has started.
Press the touchpad Start/Pause
1.
The indicator will start flashing.
If available, change the options that
2.
you wish.
" Press Start/Pause
3.
program will continue.

5.8 Opening The Door

While a program or the Delay Start is
operating, the appliance door is locked
"
and the display shows the indicator "
First, set the machine to PAUSE by
pressing the "Start/Pause
Wait until the door lock indicator "
goes off, then the door can be opened.
After approx. 15 minutes from the
start of a program:
to start the new program.
The appliance will not drain the
water (except programs; Vapour
Refresh, Spin, Rinse + Spin).
ENGLISH 19
. The
again. The
.
again. The
".
" touchpad.
"