Filling Instructions - HOMCOM 853-018 Assembly & Instruction Manual

ASSEMBLE THE ACCESSORIES
Stainless steel heating plate, Soft brush and Fabric brush:
1. Put the bottom protruding part of steam head into the groove of the attachment .
2. Push the head of attachment until the top protruding part of the steam head also clicks
in the top groove of attachment.
Line clip:
1. Put the bottom protruding part of the steam head into the groove of the line clip handle.
2. Then fix the line clip on the steam head by pushing it up gently.
CAUTION：Always let the steamer cool down before assembling or removing the attach-
ments.

FILLING INSTRUCTIONS

1. Place the unit on its back on a flat and stable surface, make sure the unit is unplugged.
(Fig. A)
A
14