Table of Contents
Advertisement
D.
Start the engine and allow it to run until it
shuts off. Repeat with the choke engaged (if
applicable) until the engine does not start.
E.
Dispose of fuel properly; recycle it according
to local regulations.
Important:
stabilizer/conditioner longer than
the duration recommended by the
fuel-stabilizer manufacturer.
10.
Remove the spark plug(s) and check its
condition; refer to
(page
38).
11.
With the spark plug(s) removed from the engine,
pour 15 ml (2 tablespoons) of engine oil into the
spark-plug hole, and use the starter to crank the
engine and distribute the oil inside the cylinder.
12.
Install the spark plug(s) but do not connect the
wire to the spark plug(s).
13.
Check and tighten all fasteners. Repair or
replace any part that is damaged or missing.
14.
Paint all scratched or bare metal surfaces with
paint from an Authorized Service Dealer.
15.
Store the machine in a clean, dry, garage or
storage area. Remove the key from the switch
and store it in a memorable place. Cover the
machine to protect it and keep it clean.
Do not store fuel containing
Removing the Spark Plug
59
Advertisement
Table of Contents
