Installing The Sigma Rox 8.0 And Its Accessories; Installing The Bracket; Installing The Transmitters - Speed And Cadence; Installing The Magnets - Speed And Cadence - Sigma ROX 8.0 Instructions Manual

1 preFace anD cOntents OF packaGe
1.2 cOntents OF packaGe
k Bracket

2 installinG the siGMa rOX 8.0 anD its accessOries

Illustrations regarding to these assembly notes can be found in the enclosed folded sheets!

2.1 installinG the Bracket

k Handlebars or front end
k Remove yellow film
2.2 installinG the transMitters – speeD anD caDence
k Both transmitters can be fitted with cable ties (permanent attachment)
or with the O-rings.
k To obtain the required gap of 12 mm or less, place the transmitter and magnet
closer to the hub.
2.3 installinG the MaGnets – speeD anD caDence

2.4 installinG the siGMa rOX 8.0 tO the Bracket

k Attachment
fittings
rOX 8.0
2 3 4 5
6 7 8 9
10 11 12 13
14 15 16
17 18 19
20
41