User Controls; Front Panel Icons; System Status Indicators - Eclipse 1000 User Manual

User Controls

This section describes the control buttons and function for your ECLIPSE Oxygen System.
F R O N T PA N E L I C O N S
ON/OFF Button and Indicator:
OFF. The Green Indicator is lit when the unit is ON.
Increase or Decrease Flow Rate Button:
flow rate to your prescribed level.
Flow Mode Button and Indicator:
toggle between Continuous Flow and Pulse Flow mode. Pulse Flow
mode allows a significant increase in the amount of time the system
can operate from the Power Cartridge. When the Pulse Flow Mode is
activated, the green Flow Mode indicator goes on and a pulse of
oxygen is delivered upon inhalation. When the pulse of oxygen is
delivered, the indicator briefly goes off. Only change your flow settings
at the recommendation of your physician.
SYS T E M S TAT U S I N D I CATO R S
The ECLIPSE control panel displays important operating information. This section will
help you understand these features.
Green, Yellow, and Red indicators on the front panel indicate the operating condition
of the system. For more information on the indicators, see the Alarm Conditions and
Troubleshooting table.
ON/OFF (Green) Indicator - System OK:
Indicates that the ECLIPSE is ON and operating properly.
ALERT (Yellow) Indicator - Low and Medium Priority Alerts:
When steadily illuminated, this indicates a low priority awareness
condition or Caution. Continue to use your system and refer to the
Model 1000 User Manual
This button turns the system ON or
Use these buttons to set the
The ECLIPSE contains a button to
ECLIPSE TM Model 1000
| 13
User Manual