Plantronics Savi W430 Quick Setup Manual

Savi W430 Quick Setup Guide
® ™
Welcome:
Using a Plantronics Savi headset for PC
calls will deliver a simpler, more
comfortable and better sounding audio
experience than you could get using just
your computer's internal microphone
and speaker.
Savi W430 Key Features:

Top quality wireless audio for the PC

DECT™ technology provides better
audio and range; eliminates Wi-Fi
network interference

Advanced wideband audio using CAT-iq
technology for high definition voice
quality

Noise-canceling microphone filters out
background noise

Digital Signal Processing technology for
outstanding voice clarity

USB DECT™ Adapter with 180-degree
articulation for optimal positioning and
storage
©2011 Plantronics, Inc. All rights reserved, Plantronics, the logo design, Savi and W430 are trademarks or registered trademarks of Plantronics, Inc. DECT is a trademark of ETSI. Cisco is a registered trademark of Cisco Systems Inc. and/or its affiliates in
the U.S. and other countries. Published 01.11
Getting started:
The Plantronics Savi headset is ready to use with your
computer and Cisco® Unified Communications
Integration for Cisco WebEx Connect™.
1. Connect your USB adapter to the computer. If
this is the first time you are connecting, wait
for the installation process to complete.
To get call control features, please download
2.
the latest version of Plantronics software at
plantronics.com/software.
Note: Check with your IT staff before installing
software on your computer.
Configuring Cisco Unified Communications Integration
for Cisco WebEx Connect to always route call audio to
the headset:
3. Click Edit in the upper left corner of the Cisco
WebEx Connect main screen.
4. Then select Settings.
5. Next choose Audio/Video.
6. Select your Plantronics headset in the drop
down for both Speakers and Microphone.
7. You can also adjust the Speakers and
Microphone volume in this screen.
8. When you are finished, select Save.
Note: USB configuration settings are unique for each USB
port. If you connect the headset to a different port you
will need to make these changes again to set behavior
for that USB port.
3
4
5
8
6
6