Plantronics Savi W430 Quick Setup Manual

Savi W430 Quick Setup Guide
® ™
Welcome:
Using a Plantronics Savi headset for PC
calls will deliver a simpler, more
comfortable and better sounding audio
experience than you could get using just
your computer's internal microphone and
speaker.
Savi W430 Key Features:

Top quality wireless audio for the PC

DECT™ technology provides better
audio and range; eliminates Wi-Fi
network interference

Advanced wideband audio using CAT-iq
technology for high definition voice
quality

Noise-canceling microphone filters out
background noise

Digital Signal Processing technology for
outstanding voice clarity

USB DECT™ Adapter with 180-degree
articulation for optimal positioning and
storage
©2011 Plantronics, Inc. All rights reserved, Plantronics, the logo design, Savi and W430 are trademarks or registered trademarks of Plantronics, Inc. DECT is a trademark of ETSI. Cisco is a registered trademark of Cisco Systems Inc. and/or its affiliates in
the U.S. and other countries. Microsoft and Lync are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other co untries. Published 10.11
Getting started:
Follow the steps below to get call answer/end controls
with your Savi headset and Cisco® Unified
Communications Integration for Microsoft® Lync™.
1. Connect your USB adapter to the computer. If
this is the first time you are connecting, wait for
the installation process to complete.
2. To get call control features, please download
the latest version of Plantronics software at
plantronics.com/software.
Note: Check with your IT staff before installing software
on your computer.
Configuring Cisco Unified Communications Integration
for Microsoft Lync to always route call audio to the
headset:
3. In the Cisco window, click the Settings button.
4. Then in the Cisco UC Options window, select
Audio.
5. Next select your Plantronics headset as the
default device for both Microphone and
Speakers.
6. Now you can select which device plays your
incoming call alerts by selecting an option for
Ringtone. These sounds typically route through
your PC speakers, but can come through your
Plantronics headset if you prefer.
7. In this screen you can also adjust Speakers and
Ringtone volume levels.
8. When you are finished, click OK.
Note: USB configuration settings are unique for each USB port.
If you connect the headset to a different port you will need to
make these changes again to set behavior for that USB port.
3
4
8
5
5
6